Abstract
We propose a general method to arbitrarily manipulate an electromagnetic wave propagating in a two-dimensional medium, without introducing any scattering. This leads to a whole class of isotropic spatially varying permittivity and permeability profiles that are invisible while shaping the field magnitude and/or phase. In addition, we propose a metamaterial structure working in the infrared that demonstrates deep subwavelength control of the electric field amplitude and strong reduction of the scattering. This work offers an alternative strategy to achieve invisibility with isotropic materials and paves the way for tailoring the propagation of light at the nanoscale.
Introduction
Traditional "Transformation Optics" achieves invisibility or light-bending by employing anisotropic materials with properties that vary based on the direction of light. However, these materials are often difficult to manufacture due to singular property requirements (values approaching zero or infinity) and complex internal architectures. Moreover, most designs rely on the ray optics approximation, which fails when the wavelength is comparable to the structure size. This research addresses the gap in controlling light at the nanoscale using simpler, isotropic materials without causing unwanted reflections or scattering.
Methodology
The researchers developed a mathematical framework for Transverse Electric (TE) polarized light by inverting the standard scalar wave equation. Instead of calculating the field from a known material, they treat the material properties—permittivity ($\epsilon$) and permeability ($\mu$)—as unknowns to be determined from a desired field profile.
The process involves:
- Field Decomposition: Representing the electric field in polar form ($E_z = Ae^{i\phi}$) to separate amplitude ($A$) and phase ($\phi$).
- Coupled Equations: Splitting the wave equation into a continuity equation for energy flow and an "exact eikonal equation" governing the rays.
- Inverse Design: Solving for $\epsilon$ and $\mu$ based on target amplitude and phase profiles.
- Numerical Validation: Using Finite Element Method (FEM) simulations to verify scattering-free propagation.
To demonstrate practical feasibility, a metamaterial was designed for the infrared spectrum (10.32 $\mu$m) using a grid of Silicon Carbide (SiC) and Potassium Bromide (KBr) rods, mapped via Maxwell-Garnett homogenization to translate continuous theoretical values into discrete physical structures.
Key Results and Discussion
The framework proves that a material can be highly inhomogeneous yet remain invisible if its permittivity and permeability satisfy specific mathematical relationships. Unlike theories based on ray optics, this method accounts for the full wave nature of light and is valid at any frequency.
Arbitrary Field Shaping
A significant achievement of this method is the ability to handle highly intricate target profiles. The researchers designed a non-magnetic medium ($\mu=1$) that shapes an incident plane wave into a grayscale portrait of James Clerk Maxwell. The computed field matched the target with less than 5% relative error, while maintaining near-zero scattering.
Metamaterial Realization
The proposed infrared metamaterial demonstrated sub-wavelength control of field amplitudes at a scale of $\lambda/27$ (approximately 377 nm for a 10.32 $\mu$m wave). This level of control is significantly below the diffraction limit, showcasing the potential for nanoscale light manipulation using real-world material dispersion data for SiC and KBr.
Limitations and Future Work
While promising, the current approach has limitations. In non-magnetic cases, invisibility is often directional; light hitting from an unintended angle will scatter. Additionally, the reliance on material dispersion means the effect is narrowband. The current work is also limited to two dimensions. Future research will focus on extending these principles to 3D volumes and conducting physical laboratory experiments to validate the metamaterial designs.
Summary updated