A Case Study of Discontinuous Innovation Based on Cusp Catastrophe Model : Implications for Predictive Risk Management

Sung‐Cheol Kim, Minsoo ShinJournal of the Korea Academia-Industrial Cooperation Society 2013 · DOI

Abstract

Managing uncertainty and discontinuity in innovation remains a significant challenge for most enterprises. This paper employs Catastrophe Theory as a theoretical basis to explain the driving forces behind discontinuous change and the "Innovator's Dilemma." By defining four types of discontinuity—technology, product, business, and consumer preference—and identifying specific "splitting variables," the authors provide a framework for interpreting the dynamics of corporate competition and identifying control factors for predictive risk management.

Introduction: The Innovator's Dilemma

Most corporate innovation is incremental (continuous), but the most disruptive changes are "discontinuous"—sudden leaps that render existing technologies or business models obsolete. This is the heart of the Innovator’s Dilemma: incumbents often fail because they are too focused on the "normal" drivers of their current success. Managers frequently lack a theoretical framework to identify the specific variables that cause these sudden jumps, leaving them unable to perform predictive risk management before they are blindsided by competitors.

Methodology: The Cusp Catastrophe Model

The researchers utilize the Cusp Catastrophe Model to describe systems where a small change in input can lead to a large, sudden change in output. The model consists of three types of variables:

  1. State Variable (Dependent): The outcome, such as market share or adoption rate.
  2. Normal Variable (Independent): Factors that typically drive gradual, linear change (e.g., pushing for higher technical specifications).
  3. Splitting Variable (Independent): The "trigger" factor. When this variable is low, change is smooth. When it is high, the system becomes unstable and can "jump" suddenly between two different states.
The Cusp Catastrophe Model illustrates how a splitting variable (Y) creates a fold in the state surface (Z), leading to phenomena like bi-modality, sudden jumps, and hysteresis.

As shown in the model, the "splitting variable" is the key to discontinuity. When it reaches a critical threshold, it creates a fold in the surface where the system must eventually jump from one level of the state variable to another (e.g., from an old technology to a new one).

Case Study Analysis

The paper employs a qualitative case study methodology focusing on well-documented industry shifts in the IT and electronics sectors. The primary cases analyzed include:

  • 4G Networking: Lucent’s MIMO vs. Samsung’s $PU^2RC$.
  • Gaming Consoles: Sony/Microsoft (PS3/Xbox 360) vs. Nintendo Wii.
  • Semiconductors: Intel’s transition from DRAM memory to Microprocessors.
  • Home Appliances: Traditional halogen ovens vs. Sharp’s "water ovens."

Key Results and Insights

By mapping these historical case studies onto the Cusp model, the authors identified the specific variables that acted as the "splitting" triggers in each scenario.

A summary of the state, normal, and splitting variables identified for the four types of discontinuous innovation analyzed in the study.

The Power of the Splitting Variable

The core insight is that incumbents usually lose because they focus exclusively on the Normal Variable (e.g., making a processor faster). Meanwhile, the disruptor introduces a Splitting Variable (e.g., making the device significantly cheaper or easier to use) that triggers a sudden market jump.

Technology Overshoot and Hysteresis

Pushing a technology too far (Normal Variable) often creates a "performance surplus" that consumers no longer value, making the market ripe for a jump if a competitor introduces a new Splitting Variable. Furthermore, the model explains hysteresis: once a market jumps to a new state (like the shift to smartphones), it is nearly impossible to move it back to the previous state, even if the original technology improves significantly.

Strategic Implications for Risk Management

By identifying these variables early, companies can treat them as "control factors" to either trigger a jump themselves or defend against one. This framework allows for a more proactive approach to risk, moving beyond retrospective analysis toward identifying the tipping points of market stability.

Conclusion

While identifying the correct splitting variable in real-time remains a challenge, the Cusp Catastrophe Model offers a robust lens for understanding non-linear market dynamics. Future research should focus on developing quantitative metrics for these variables to create a more robust predictive tool for corporate strategy.

Summary updated

Abstract

혁신에서 불확실성이나 불연속을 경영한다는 것은 대부분의 기업에게 어려운 과제이다. 기업의 지속 가능한 장기적인 생존을 위해 불연속 혁신이 내포하고 있는 문제 중 하나는 혁신가의 딜레마이다. 특히 불연속 혁신과 기존 사업자간의 동태적인 상황은 연구자들과 기업 경영자들에게 큰 관심사항이다. 본 논문은 불연속 혁신이라는 현상을 설명하는 이론적 배경으로 격변이론을 도입한다. 즉, 불연속 혁신에 대한 기업전략의 동태적인 현상을 격변이론의 틀에서 해석함으로써 혁신딜레마를 극복하는 제어인자를 도출한다. 이를 위해 본 논문은 불연속 혁신의 네 가지 유형으로 기술 불연속, 제품 불연속, 사업 불연속, 그리고 소비자 선호도 불연속을 정의하고, 각각의 유형별로 불연속 혁신 실사례를 격변이론의 관점에서 해석함으로써 불연속 혁신을 중심으로 한 기업간 경쟁의 동태적인 상황을 분석하였다. 이러한 분석 과정은 기업 간 경쟁 속에서 예측이 떨어지는 불연속적인 상황에 미리 대처할 수 있는 제어인자를 발굴할 수 있도록 해준다. Managing uncertainty or discontinuity in an innovation is still a challenge to most companies. For sustainable corporate survival over the long term, one of the problems caused by discontinuous innovation is the innovator's dilemma. In specific, the dynamics between discontinuous innovation and incumbents inspires the interestof researchers and managers. This paper employs catastrophe theory as a theoretical basis to explain the driving force of new discontinuous change. In other words, we extract the control variables overcoming innovation dilemma by interpreting the dynamics of corporate strategy for discontinuous innovation from the perspective of catastrophe theory. First, we define four types of discontinuity such as technology discontinuity, product discontinuity, business discontinuity, and consumer preference discontinuity. Second, we analyze the dynamics of the competition between companies by interpreting the cases of discontinuous innovation. This analyzing process enables us to identify the control variable which can, in advance, respond to the discontinuous situation.
BibTeX
@article{kim2013case,
  author = {Sung‐Cheol Kim and Minsoo Shin},
  title = {{A Case Study of Discontinuous Innovation Based on Cusp Catastrophe Model : Implications for Predictive Risk Management}},
  journal = {Journal of the Korea Academia-Industrial Cooperation Society},
  year = {2013},
  doi = {10.5762/kais.2013.14.5.2140},
}
Figure