A butterfly-like slot UWB antenna with WLAN band-notch characteristics for MIMO applications

Meng Wang, Huaibin Wang, Peng Chen, Tongyu Ding, Jun Xiao, Liang ZhangIEICE Electron. Express 2022 · OpenReview

Introduction

Ultra-Wideband (UWB) technology offers significant advantages for high-speed wireless communication due to its massive frequency range. However, its implementation faces two primary challenges: spectral interference from existing narrowband signals like WLAN (5.1–5.8 GHz) and mutual coupling between elements in Multiple-Input Multiple-Output (MIMO) arrays. This paper presents a compact, four-element MIMO antenna designed to address these issues through innovative geometry and spatial orientation.

Design Methodology

The core of the design is a single antenna element featuring a Defected Ground Structure (DGS). A "butterfly-like" slot is etched into the ground plane to optimize impedance matching across the 3–12 GHz spectrum. To mitigate interference from WLAN signals, a symmetrical T-shaped meandering strip is integrated. This strip is connected to the main patch via a vertical electrical connection (via), acting as a resonator that traps energy at approximately 5.2 GHz.

Geometry of the proposed antenna element showing the patch (a) and the ground plane with the butterfly-like slot and T-shaped strip (b).

MIMO Configuration and Isolation

To achieve high data throughput without bulky decoupling structures, the researchers arranged four identical antenna units in an orthogonal layout. By placing the ports at 90-degree angles to one another, the design leverages polarization diversity to naturally reduce electromagnetic interference between adjacent elements. This approach maintains a compact footprint of 72 × 72 × 1.2 mm³ while ensuring high isolation of better than 15 dB across the entire operating band.

Performance Analysis

The antenna's performance was verified through both full-wave electromagnetic simulations and physical measurements of a prototype fabricated on an FR4 substrate. The results demonstrate a wide operating bandwidth from 3 GHz to 12 GHz, with a sharp rejection notch in the 5.05–5.35 GHz range to filter out WLAN interference.

Simulated S11 and gain characteristics for different antenna design stages, highlighting the band-notch at 5.2 GHz.

Key performance metrics include:

  • Diversity Performance: An Envelope Correlation Coefficient (ECC) below 0.015 and a Diversity Gain (DG) exceeding 9.92 dB, indicating excellent independent signal paths.
  • Gain: A peak gain of 6.8 dBi, which is notably high for a compact UWB design.
  • Current Cancellation: Surface current analysis confirms that at the 5.2 GHz notch frequency, the T-strip produces a reverse electromagnetic field that effectively cancels the signal.

Conclusion

The proposed four-port MIMO antenna successfully combines wideband operation with effective interference rejection. By utilizing a butterfly-like slot for matching and an orthogonal layout for isolation, the design provides a robust solution for UWB applications. Future work may focus on using lower-loss substrates or integrating active components for tunable notch characteristics to adapt to different interference environments.

Summary updated

BibTeX
@inproceedings{wang2022butterfly,
  author = {Meng Wang and Huaibin Wang and Peng Chen and Tongyu Ding and Jun Xiao and Liang Zhang},
  title = {{A butterfly-like slot UWB antenna with WLAN band-notch characteristics for MIMO applications}},
  booktitle = {IEICE Electron. Express},
  year = {2022},
  url = {https://openreview.net/forum?id=zm0lCaEE3Rr},
}
Figure