A 256-Mb SDRAM using a register-controlled digital DLL

A. Hatakeyama, H. Mochizuki, T. Aikawa, M. Takita, Yoshikazu Ishii, Hideyuki Tsuboi, S. Fujioka, S. Yamaguchi, M. Koga, Yoshizumi Serizawa, Koki Nishimura, K. Kawabata, Yoshinori Okajima, M. Kawano, Hisashi Kojima, Keisuke Mizutani, T. Anezaki, Minoru Hasegawa, M. TaguchiIEEE Journal of Solid-State Circuits 1997 · DOI

Abstract

This paper describes the key technologies used in a 256-Mb synchronous DRAM with a clock access time of 1 ns. This DRAM is stable against temperature, voltage, and process variation through the use of a register-controlled digital delay-locked loop (RDLL). The total timing error of the RDLL is about 0.4 ns, sufficient for high frequency operation at 150 to 200 MHz. Unlike most conventional high-density DRAMs, the bit lines are placed above the storage capacitors in this DRAM to relax the design rules of the core area. The noise issues were analyzed and resolved to help implement the technology for mass production of 0.28- to 0.24-/spl mu/m 200-MHz DRAMs.
BibTeX
@article{hatakeyama1997mb,
  author = {A. Hatakeyama and H. Mochizuki and T. Aikawa and M. Takita and Yoshikazu Ishii and Hideyuki Tsuboi and S. Fujioka and S. Yamaguchi and M. Koga and Yoshizumi Serizawa and Koki Nishimura and K. Kawabata and Yoshinori Okajima and M. Kawano and Hisashi Kojima and Keisuke Mizutani and T. Anezaki and Minoru Hasegawa and M. Taguchi},
  title = {{A 256-Mb SDRAM using a register-controlled digital DLL}},
  journal = {IEEE Journal of Solid-State Circuits},
  year = {1997},
  doi = {10.1109/4.641693},
}

Loading related content...

Figure