A 12-Bit 2 GS/s Single-Channel High Linearity Pipelined ADC in 40 nm CMOS

Feitong Wu, Xuan Guo, Hanbo Jia, Xiuheng Wu, Zeyu Li, Ben He, Danyu Wu, Xinyu LiuMicromachines 2023 · DOI

TL;DR

This paper presents a 12-bit, 2 GS/s single-channel pipelined ADC designed for high-speed, wideband sampling receivers. The authors introduce novel techniques for the input buffer and amplifier stages to achieve high linearity and bandwidth, along with a dither injection strategy to further improve performance, resulting in a state-of-the-art Schreier FoM.

What Problem Does This Paper Address?

Modern communication systems, including millimeter-wave wireless, radio, and cellular technologies, demand ever-increasing data rates and signal quality. This necessitates Analog-to-Digital Converters (ADCs) capable of handling GHz bandwidths and high accuracy, often for digitizing Intermediate Frequency (IF) or Radio Frequency (RF) signals. While time-interleaved ADCs can achieve high sampling rates, they suffer from increased system complexity, reduced input bandwidth due to intricate routing, and performance degradation from mismatches between interleaved channels. Pipelined ADCs offer a good balance of speed, resolution, and bandwidth, but achieving high linearity and speed simultaneously, especially at multi-GS/s rates, remains a significant challenge. Specifically, amplifier linearity and bandwidth limitations, as well as input buffer performance, are critical bottlenecks. This paper aims to address these challenges by developing a high-linearity, wide-bandwidth single-channel pipelined ADC.

Methods

The authors propose several key innovations to achieve their performance goals:

  • Novel Source Follower Input Buffer: This buffer utilizes multiple feedback loops to enhance sample linearity and extend the input bandwidth. This is crucial for preventing distortion and signal degradation at the very front of the ADC.
  • Improved Two-Stage Charge Pump Amplifier: An enhanced amplifier topology incorporating a charge pump is introduced. This design aims to double the Gain Bandwidth Product (GBW) without increasing power consumption, which is vital for meeting the high-speed requirements of the ADC.
  • Multi-Level Dither Strategy: To combat background noise and improve linearity, a multi-level dither strategy is employed. This involves a new high-speed, low-cost pseudorandom code generator that injects a carefully designed dither signal. This technique helps to spread out spurious tones and improve the overall spectral purity.
  • Pipelined Architecture: The ADC employs a standard pipelined architecture, with the first two stages featuring a 3.5-bit stage with dither injection, followed by three 3-bit stages and a 4-bit flash ADC. Redundancy is incorporated in the initial stages to prevent over-ranging.

Datasets

Not discussed in the paper. The performance is evaluated through measurements on a fabricated prototype chip.

Key Insights and Ideas

  • Input Buffer is King (for Bandwidth and Linearity): The paper strongly emphasizes the critical role of the input buffer. By employing a novel feedback structure, they demonstrate significant improvements in both linearity and bandwidth, directly impacting the overall ADC performance.
  • Charge Pump Amplifiers for GBW Boost: The clever use of a charge pump in the amplifier stage to effectively double the GBW without a power penalty is a key insight for achieving high-speed operation in pipelined ADCs.
  • Dithering as a Spectrum Optimizer: The multi-level dither strategy is shown to be highly effective in mitigating spurious signals and improving the SFDR, particularly at higher frequencies, without significantly impacting the SNDR. This highlights the importance of spectral shaping techniques in high-performance ADCs.
  • Single-Channel Advantage: By focusing on a single-channel design, the authors avoid the complexities and inherent mismatches associated with time-interleaved ADCs, allowing for a more optimized and linear performance.

Key Results

The prototype ADC, fabricated in a 40 nm CMOS process, demonstrates impressive performance:

  • Sampling Rate: 2 GS/s
  • Resolution: 12-bit
  • SFDR (Spurious-Free Dynamic Range): Achieves 68.24 dB up to the Nyquist frequency (1 GHz) after calibration. With dither enabled, SFDR further improves to 69.83 dB. At low input frequencies, SFDR reaches up to 78 dB.
  • SNDR (Signal-to-Noise and Distortion Ratio): 54.87 dB at Nyquist frequency.
  • Bandwidth: Exceeds 5 GHz, demonstrating its suitability for wideband applications.
  • Schreier Figure of Merit (FoM): 152.4 dB, which is competitive with state-of-the-art pipelined ADCs.
  • Power Consumption: The ADC core consumes 895 mW, with specific breakdowns for key blocks (input buffer: 156 mW, THA: 125 mW, first stage MDAC: 138 mW).

Limitations and Future Work

  • Power Consumption: While competitive, the 895 mW power consumption for the ADC core is substantial, which is typical for high-speed, high-resolution ADCs. Future work could focus on further power optimization.
  • Area: The analog part of the ADC core occupies approximately 25% of the 1.2 mm × 1.8 mm die area. Further integration and scaling could reduce this.
  • Future Work: The paper implicitly suggests that further exploration of dither injection techniques and amplifier designs could lead to even higher performance. The authors also mention the need for advanced high-speed ADC technology, implying that continued advancements in process technology will be crucial for future designs.

Summary updated

Abstract

This paper presents a single-channel 12-bit, 2 GS/s pipelined analog-to-digital converter (ADC) for wideband sampling receivers. The design adopts a novel source follower input buffer with multiple feedback loops to improve sample linearity and extend bandwidth. Additionally, an improved two stages charge pump amplifier topology is introduced, which doubles the Gain Bandwidth Product (GBW) without consuming additional power. To address the back-end ADC and background calibration, a multi-level dither strategy is employed, utilizing a new high-speed and low-cost uniform distribution pseudorandom code generator. The prototype ADC fabricated in 40 nm CMOS process achieves 68.24 dB SFDR up to Nyquist frequency with a sampling rate of 2 GS/s. Measurement results demonstrate a bandwidth exceeding 5 GHz, resulting in a Schreier FOMs of 152.4 dB.
BibTeX
@inproceedings{wu2023bit,
  author = {Feitong Wu and Xuan Guo and Hanbo Jia and Xiuheng Wu and Zeyu Li and Ben He and Danyu Wu and Xinyu Liu},
  title = {{A 12-Bit 2 GS/s Single-Channel High Linearity Pipelined ADC in 40 nm CMOS}},
  booktitle = {Micromachines},
  year = {2023},
  doi = {10.3390/mi14071291},
}
Figure