750 V Breakdown in GaN Buffer on 200 mm SOI Substrates Using Reverse-Stepped Superlattice Layers

Shuzhen You, Yilong Lei, Liang Wang, Xing Chen, Ting Zhou, Yi Wang, Junbo Wang, Tong Liu, Xiangdong Li, Shenglei Zhao, Jincheng Zhang, Yue HaoMicromachines 2024 · DOI

TL;DR

This paper presents a novel "reversed stepped superlattice buffer" (RSSL) for Gallium Nitride (GaN) epitaxy on 200 mm Silicon-on-Insulator (SOI) substrates. This RSSL buffer effectively controls wafer warpage, enabling a 750 V breakdown voltage in a 3.3 µm thick GaN buffer layer, paving the way for high-performance GaN power devices on larger, more cost-effective substrates.

What Problem Does This Paper Address?

Gallium Nitride (GaN) is a promising material for high-efficiency power electronics due to its superior bandgap, electron mobility, and breakdown voltage compared to silicon. However, achieving high-quality GaN epitaxy on large-diameter, cost-effective substrates like silicon has been challenging. Native GaN substrates are expensive and small, while GaN-on-Si suffers from issues like crosstalk and "backgating" effects due to the conductive silicon substrate. Silicon-on-Insulator (SOI) substrates offer a potential solution by incorporating an insulating buried oxide layer, mitigating these substrate-related issues.

A key challenge in growing thick GaN layers on compliant SOI substrates for high breakdown voltages is controlling wafer warpage. As GaN layers grow thicker, intrinsic stress can lead to significant wafer curvature, potentially causing cracking and hindering further processing. Existing buffer layer strategies, while improving crystal quality, often struggle to manage this warpage, especially for the thick layers needed for high-voltage applications. This paper aims to address this warpage control issue while achieving high breakdown voltages in GaN epitaxy on 200 mm SOI substrates.

Methods

The core innovation in this work is the development and implementation of a Reversed Stepped Superlattice Buffer (RSSL). This RSSL structure is designed to introduce tensile stress, counteracting the compressive stress typically generated during GaN epitaxy. The RSSL consists of two superlattice (SL) layers stacked in reverse order:

  • SL1 (Lower Layer): Composed of 5 nm AlN / 23 nm Al₀.₁₅Ga₀.₈₅N unit cells (approximately 30% Al content). This layer, when grown conventionally, would introduce compressive stress.
  • SL2 (Upper Layer): Composed of 7 nm AlN / 23 nm Al₀.₃Ga₀.₇N unit cells (approximately 46% Al content). By stacking this layer with a higher Al component ratio on top of SL1, the RSSL structure induces tensile stress.

This tensile stress generation is crucial for controlling wafer curvature. The GaN buffer structure, including the RSSL, was grown using Metal-Organic Chemical Vapor Deposition (MOCVD) on 200 mm SOI substrates. The SOI substrate itself consists of a P-type (111) silicon top layer, a SiO₂ buried oxide layer, and a silicon (100) handle layer.

Following buffer growth, a GaN HEMT (High Electron Mobility Transistor) device was fabricated on the RSSL buffer. This involved standard semiconductor processing steps including ohmic contact formation, ion implantation for isolation, dielectric deposition (Al₂O₃ and SiO₂), and gate metal deposition.

Datasets

Not discussed in the paper. The study focuses on the growth and characterization of GaN layers and the fabrication of a single HEMT device, rather than training or evaluating models on large datasets.

Key Insights and Ideas

  • Tensile Stress Engineering: The "reversed" stacking order of superlattice layers with differing Al content is a clever way to engineer tensile stress, directly counteracting the compressive stress that causes wafer warpage. This is a significant departure from conventional stepped superlattice designs.
  • Wafer Warpage Control: The RSSL buffer effectively controls in-situ wafer curvature, achieving a well-controlled wafer bow of ≤ ±50 µm for a 3.3 µm thick buffer. This is critical for enabling large-diameter wafer processing and preventing device failures due to mechanical stress.
  • SOI as a Compliant Substrate: The inherent compliance of the SOI substrate, particularly the buried oxide layer, plays a vital role in absorbing strain and contributing to the improved crystal quality of the GaN layers.
  • High Breakdown Voltage Achieved: The RSSL buffer, in conjunction with the SOI substrate, enables a remarkable 750 V breakdown voltage for the GaN buffer layer itself, a key metric for power device applications.
  • Improved Breakdown Field Strength: The estimated breakdown field strength of ~2.27 MV/cm for the GaN-on-SOI RSSL buffer is superior to that of GaN-on-Si buffers, bringing it closer to the theoretical limit of GaN.
  • Low Buffer Dispersion: The RSSL buffer exhibits low dispersion (<10%), indicating its stability and suitability for subsequent device fabrication processes, which is crucial for manufacturing yield.

Key Results

  • Breakdown Voltage: A breakdown voltage of 750 V was achieved for the 3.3 µm thick GaN buffer layer on the 200 mm SOI substrate.
  • Wafer Warpage: The in-situ wafer warpage was controlled to ≤ ±50 µm for a 3.3 µm thick buffer.
  • Breakdown Field Strength: The estimated breakdown field strength of the epitaxial GaN buffer layer is approximately ~2.27 MV/cm.
  • Buffer Dispersion: The RSSL buffer demonstrated a buffer dispersion of less than 10%.
  • HEMT Performance: A D-mode GaN HEMT fabricated on this RSSL buffer showed a good on/off ratio of ~10⁹ and a breakdown voltage of 450 V.
  • 2DEG Properties: The AlGaN/GaN heterojunction exhibited a 2DEG mobility of 1850 cm²/V·s and a concentration of 1.03 × 10¹³ cm⁻² at 300 K, with a 2DEG sheet resistance of 330 Ω/Π.

Limitations and Future Work

  • Breakdown Voltage Comparison: While the 750 V buffer breakdown is impressive, the paper notes that GaN-on-GaN offers even higher breakdown fields (2.3 MV/cm). However, the cost of GaN-on-GaN is prohibitive for widespread commercialization.
  • HEMT Breakdown: The fabricated HEMT achieved a breakdown voltage of 450 V, which is lower than the buffer breakdown voltage. This suggests that further optimization of the device structure and gate engineering might be needed to fully leverage the high-voltage capability of the buffer.
  • Future Work (Implied): The authors' success in controlling warpage and achieving high breakdown voltages on 200 mm SOI substrates strongly suggests future work will focus on scaling up these processes, optimizing device designs for higher performance, and exploring integration with other functionalities for more complex GaN-based power systems. The paper also highlights the need for continued research into buffer layer designs for even higher breakdown voltages and improved reliability.

Summary updated

Abstract

In this work, we demonstrated the epitaxial growth of a gallium nitride (GaN) buffer structure on 200 mm SOI (silicon-on-insulator) substrates. This epitaxial layer is grown using a reversed stepped superlattice buffer (RSSL), which is composed of two superlattice (SL) layers with different Al component ratios stacked in reverse order. The upper layer, with a higher Al component ratio, introduces tensile stress instead of accumulative compressive stress and reduces the in situ curvature of the wafer, thereby achieving a well-controlled wafer bow ≤ ±50 µm for a 3.3 µm thick buffer. Thanks to the compliant SOI substrate, good crystal quality of the grown GaN layers was obtained, and a breakdown voltage of 750 V for a 3.3 µm thick GaN buffer was achieved. The breakdown field strength of the epitaxial GaN buffer layer on the SOI substrate is estimated to be ~2.27 MV/cm, which is higher than the breakdown field strength of the GaN-on-Si epitaxial buffer layer. This RSSL buffer also demonstrated a low buffer dispersion of less than 10%, which is good enough for the further processing of device and circuit fabrication. A D-mode GaN HEMT was fabricated on this RSSL buffer, which showed a good on/off ratio of ~10<sup>9</sup> and a breakdown voltage of 450 V.
BibTeX
@inproceedings{you2024v,
  author = {Shuzhen You and Yilong Lei and Liang Wang and Xing Chen and Ting Zhou and Yi Wang and Junbo Wang and Tong Liu and Xiangdong Li and Shenglei Zhao and Jincheng Zhang and Yue Hao},
  title = {{750 V Breakdown in GaN Buffer on 200 mm SOI Substrates Using Reverse-Stepped Superlattice Layers}},
  booktitle = {Micromachines},
  year = {2024},
  doi = {10.3390/mi15121460},
}
Figure