6-DOF All-Terrain Cyclocopter

Jingwei Li, Boyuan Deng, Xinyu Zhang, Kangyao HuangarXiv 2023 · DOI · arXiv

Abstract

This paper introduces a 6-DOF "Cyclocopter"—a multimodal micro air vehicle (MAV) that uses cycloidal rotors to transition seamlessly between aerial, terrestrial, and aquatic environments. By combining a novel mechanical design with Nonlinear Model Predictive Control (NMPC), the researchers achieved precise 6-DOF maneuverability in a system that remains agile across diverse terrains. Unlike traditional multimodal designs that rely on auxiliary hardware, the Cyclocopter utilizes its propulsion system for ground locomotion, minimizing weight and maximizing efficiency.

Introduction: The Challenge of Multimodal Locomotion

Most unmanned aerial vehicles (UAVs) are optimized for a single environment, typically air. While the demand for "multimodal" vehicles capable of operating across land, air, and water is growing, current designs often face significant performance trade-offs. For instance, adding external structures like wheels or protective cages to a quadrotor increases weight and drag, which severely degrades flight agility and battery life.

Overview of existing multimodal robotic platforms, including the HyTAQ vehicle (a), a bipedal robot (b), and the Nezha hybrid vehicle (c).

A prominent example is the HyTAQ vehicle, which uses a rolling cage to achieve terrestrial movement. While effective for ground transit, the cage acts as "dead weight" during flight, reducing overall performance. Similarly, morphing-wing designs or other hybrid vehicles often involve mechanical complexities that slow down environmental transitions.

The HyTAQ vehicle in resting, flight, and rolling modes, illustrating the use of a protective cage for terrestrial locomotion.

Furthermore, micro-scale flight occurs at low Reynolds numbers, where traditional rotors lose efficiency. Cycloidal rotors (cyclorotors), which feature blades rotating around a horizontal axis, offer a compelling alternative due to their high lift-to-drag ratios and the ability to vector thrust almost instantaneously in any direction. However, controlling these systems is difficult because they are inherently nonlinear and often underactuated.

Methodology and Design

The proposed Cyclocopter features a unified mechanical design propelled by four motors and a single servo. The servo adjusts the pitch of the cyclorotors, enabling dynamic manipulation of the lift vector.

Unified Mechanical Design

The core innovation lies in the dual-purpose use of the cyclorotors. Instead of adding wheels, the rotors themselves serve as wheels for ground movement. This eliminates the need for heavy external tires or legs, solving the weight-to-agility trade-off seen in previous multimodal MAVs. In aquatic environments, the system reconfigures into a two-wheel differential drive model, significantly reducing energy consumption compared to full aerial propulsion.

Control Architecture

The vehicle's control system is structured to handle the complexities of multi-environment transit:

  • Finite State Machine (FSM): Orchestrates mode transitions, such as deploying landing gear for takeoff or reversing motor directions for ground driving.
  • Nonlinear Model Predictive Control (NMPC): This is the "brain" of the aerial mode. Unlike standard PID controllers, NMPC can look ahead at the desired trajectory and solve an optimization problem in real-time while respecting physical constraints, such as motor thrust limits and a maximum fuselage tilt of $\pm30^\circ$ to maintain stability.
  • Cascade PID: Serves as a baseline for basic altitude and attitude stability.

Results and Discussion

The researchers validated the design through a simulated 300-meter multimodal mission in Simulink. The vehicle successfully navigated 100 meters as a ground rover, performed a vertical takeoff to fly the next 100 meters, and finally transitioned into water for the final leg.

Key findings include:

  • Efficiency: The "wheel-less" ground mode effectively eliminated the weight-to-agility trade-off.
  • Control Robustness: NMPC significantly outperformed traditional PID controllers. It better handled the "coupling" effects—where movement in one axis impacts others—and reduced overshoot during rapid maneuvers. The NMPC controller successfully kept acceleration within the $-5$ to $15 m/s^2$ safety bounds.

Limitations and Future Work

While the simulation results are promising, the current study relies on an ideal mathematical model in Simulink. Real-world implementation will face challenges such as unpredictable wind gusts or water currents that may test the limits of the NMPC framework. Additionally, the physical durability of the four-bar linkage mechanism in the cyclorotors must be evaluated when subjected to the friction and impact of terrestrial movement. Future work will also involve integrating autonomous navigation capabilities, such as SLAM, to enable fully autonomous environmental transitions.

Summary updated

BibTeX
@misc{li2023dof,
  author = {Jingwei Li and Boyuan Deng and Xinyu Zhang and Kangyao Huang},
  title = {{6-DOF All-Terrain Cyclocopter}},
  year = {2023},
  eprint = {2309.13631},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2309.13631},
}
Figure