Abstract
Quantum key distribution (QKD) enables secure communication by harnessing the fundamental principles of quantum physics, which inherently guarantee information‐theoretic security and intrinsic resistance to quantum computing attacks. However, the secure key rate of QKD typically decreases exponentially with increasing channel distance. In this work, through the development of a novel polarization‐state preparation method, an ultra‐low time‐jitter laser source, and superconducting nanowire single‐photon detectors, a 5‐GHz integrated QKD system featuring ultra‐low quantum bit error rates (QBERs) is demonstrated. The system achieves secure key rates of 1.076 Mbps at 150 km and 105 kbps at 200 km over standard single‐mode fiber channels, respectively. The system substantially enhances the secure key rate, enabling the implementation of high‐resolution video calls with one‐time‐pad encryption over intercity backbone QKD links. This work represents a significant step forward in the development of high‐performance practical QKD systems.
Introduction
Quantum Key Distribution (QKD) represents the gold standard for secure communication, offering "unbreakable" encryption based on the laws of physics. However, two major hurdles prevent its widespread adoption: speed and distance. As fiber optic cable distance increases, signal attenuation causes the secure key rate (SKR) to drop exponentially. While increasing the clock rate to gigahertz (GHz) frequencies can compensate for this loss, it introduces significant challenges in pulse timing (jitter) and quantum state preparation. At high speeds, tiny timing errors and hardware imperfections lead to high Quantum Bit Error Rates (QBER), which can prevent secure key generation. Integrated photonic chips offer a path to scalability but often suffer from poor extinction ratios, introducing noise when separating polarization states.
Methods
The researchers developed an integrated 5-GHz QKD system utilizing several advanced components to overcome these limitations. The transmitter is a silicon-based photonic circuit featuring high-speed Mach–Zehnder interferometers (MZIs) for intensity and phase modulation. To ensure precise timing at 5-GHz speeds, a gain-switched laser with a pulse width of 26 ps and a jitter of 6 ps was employed.
On the receiver side, superconducting nanowire single-photon detectors (SNSPDs) with a twin-layer architecture were used to balance high detection efficiency with ultra-low timing jitter (<50 ps). A critical innovation is the novel polarization preparation method. Instead of relying on perfect hardware fabrication, the team implemented a dual-MZI structure and an iterative algorithm. By fine-tuning the phases in two consecutive MZIs, they can "rotate" an imperfect quantum state back to its ideal position on the Poincaré sphere, achieving high-fidelity states despite hardware imperfections.
Results and Discussion
The system was evaluated using standard single-mode fiber (G.652.D) at physical lengths of 150 km and 200 km, as well as equivalent loss channels up to 275 km. The most significant result is the achievement of a 1.076 Mbps SKR at 150 km, a critical threshold for supporting real-time, high-definition video calls encrypted with One-Time Pad (OTP).
The system maintained an ultra-low QBER of approximately 0.5% (0.52% for the Z-basis and 0.44% for the X-basis). This performance represents an order of magnitude improvement over previous state-of-the-art 5-GHz QKD systems at similar distances. Long-term stability was demonstrated through a 6-hour continuous run, confirming the system's readiness for practical intercity backbone links.
Conclusion
This work demonstrates that algorithmic compensation for hardware flaws, such as the iterative polarization method, can enable high-performance QKD without requiring perfect chip fabrication. While the current system requires a pre-calibration phase, future automation could lead to "plug-and-play" deployment. Theoretical simulations suggest that at shorter metropolitan distances (e.g., 5 km), this technology could reach speeds up to 550 Mbps, potentially securing high-speed data centers. Future efforts will focus on integrating this high-speed chip technology with quantum repeaters or satellite links to scale toward global distances.
Summary updated