3D Surface Mapping of Capsule Fill-Tube Assemblies used in Laser-Driven Fusion Targets

Eric S. Buice, E T Alger, Nick Antipa, S. D. Bhandarkar, T. Biesiada, A. Conder, E. G. Dzenitis, M. Flegel, A. V. Hamza, C. Heinbockel, J. Horner, Michael Johnson, Laura M. Kegelmeyer, James S. Meyer, R C Montesanti, Jack Reynolds, John S. Taylor, Paul J. WegnerUniversity 2011

TL;DR

This paper introduces a novel 3D surface mapping system designed to precisely measure the intricate surfaces of Capsule Fill-Tube Assemblies (CFTAs) used in laser-driven fusion experiments. This system is crucial for quality assurance, enabling the detailed characterization of these tiny, critical components for the National Ignition Facility (NIF).

What Problem Does This Paper Address?

Laser-driven inertial confinement fusion, as pursued at the National Ignition Facility (NIF), relies on precisely manufactured targets. These targets often consist of a spherical capsule containing fuel, which is filled through a tiny, attached fill-tube. The integrity and precise geometry of both the capsule and the fill-tube are paramount for successful fusion ignition. Any surface imperfections, contamination, or deviations from the intended shape can significantly impact the implosion dynamics and the overall experiment outcome. Therefore, a highly accurate and detailed method for characterizing the 3D surface of these Capsule Fill-Tube Assemblies (CFTAs) is essential for quality assurance and for archiving crucial data for future analysis. The challenge lies in measuring these sub-millimeter scale, complex geometries with nanometer-level precision.

Methods

The core of the system is a sophisticated 3D surface mapping setup that utilizes a confocal microscope. This microscope is mounted on a multi-axis motion stage system, providing seven linear and three rotational axes. This extensive kinematic capability allows for a deterministic 4π steradian inspection of the CFTA. The CFTA itself is held by a vacuum wand, which is then manipulated by the motion stages.

The measurement process involves:

  • Homing and Centering: The system is homed, and the CFTA is centered using the microscope and precise movements of the RT-, Xm-, Ym-, and Zm-axes.
  • Scanning and Stitching: A scan is performed in the z-direction (radial to the capsule center) to capture height data. Incremental rotations of the φ-axis (around the CFTA) are performed, with images stitched together to build a comprehensive 3D surface map.
  • Hand-off Mechanism: To image the entire surface, including areas obscured by the initial vacuum wand, a "hand-off" procedure is employed. The CFTA is transferred from the primary vacuum wand to a secondary "hand-off" wand, allowing access to the previously hidden regions.
  • Fill-Tube Manipulation: The fill-tube itself is also manipulated and bent using specific rotational axes (θ1 and θ2) and linear axes (Xm, Ym) to ensure minimal stress on the capsule-fill-tube interface during measurement.
  • Calibration: The system is calibrated to relate the 3D surface measurements to the capsule's angular coordinate system with high precision (0.25 degrees, 1σ), translating to approximately 5 µm linear error on the capsule surface.

Datasets

Not discussed in the paper. The paper focuses on the development and methodology of the measurement system itself, rather than its application to a specific dataset of CFTAs.

Key Insights and Ideas

  • Precision for Fusion: The paper highlights the critical need for extremely precise 3D surface metrology for fusion targets, where even nanometer-scale features can have significant implications.
  • Integrated System Design: The development of a complete system, from sample manipulation (vacuum wands) to high-resolution imaging (confocal microscope) and precise motion control, is key to achieving the required accuracy.
  • Overcoming Occlusion: The innovative "hand-off" wand mechanism is a clever solution to the challenge of imaging the entire surface of a complex, attached component like the fill-tube.
  • Deterministic Inspection: The use of a multi-axis system for deterministic 4π steradian inspection ensures that no part of the critical surface is missed.
  • Automated Error Correction: The system's ability to continuously re-center the CFTA during scanning helps compensate for minor stage errors and thermal drift, improving measurement robustness.

Key Results

The developed 3D Surface Mapping System is designed to:

  • Locate and quantify surface features with a height of 50 nm and a width of 300 nm or larger.
  • Relate the 3D measured surface to the capsule surface angular coordinate system to within 0.25 degrees (1σ), which corresponds to approximately 5 µm linear error on the capsule surface.
  • The system enables a quality assurance program and archiving of 3D surface information for capsules used in fusion ignition experiments at NIF.

Limitations and Future Work

  • Limited to 95% Initial Coverage: The initial measurement process covers approximately 95% of the CFTA surface. The hand-off mechanism is then used to capture the remaining 5%.
  • Mechanical Interference: There is a limit to how far the θ1-axis can be rotated due to mechanical interference, requiring the use of the Xm-axis to reposition.
  • Future Work: While not explicitly detailed, the paper implies that the continued use and refinement of this system will be crucial for ongoing fusion ignition experiments. Further optimization of the stitching algorithm and potentially exploring even higher resolution imaging techniques could be future directions.

Summary updated

Abstract

This paper presents the development of a 3D surface mapping system used to measure the surface of a fusion target Capsule Fill-Tube Assembly (CFTA). The CFTA consists of a hollow Ge-doped plastic sphere, called a capsule, ranging in outer diameter between 2.2 mm and 2.6 mm and an attached 150 {micro}m diameter glass-core fill-tube that tapers down to a 10{micro} diameter at the capsule. The mapping system is an enabling technology to facilitate a quality assurance program and to archive 3D surface information of each capsule used in fusion ignition experiments that are currently being performed at the National Ignition Facility (NIF). The 3D Surface Mapping System is designed to locate and quantify surface features with a height of 50 nm and 300 nm in width or larger. Additionally, the system will be calibrated such that the 3D measured surface can be related to the capsule surface angular coordinate system to within 0.25 degree (1{sigma}), which corresponds to approximately 5 {micro}m linear error on the capsule surface.
BibTeX
@inproceedings{buice2011d,
  author = {Eric S. Buice and E T Alger and Nick Antipa and S. D. Bhandarkar and T. Biesiada and A. Conder and E. G. Dzenitis and M. Flegel and A. V. Hamza and C. Heinbockel and J. Horner and Michael Johnson and Laura M. Kegelmeyer and James S. Meyer and R C Montesanti and Jack Reynolds and John S. Taylor and Paul J. Wegner},
  title = {{3D Surface Mapping of Capsule Fill-Tube Assemblies used in Laser-Driven Fusion Targets}},
  booktitle = {University},
  year = {2011},
}
Figure