3D Simulations of Electrical Characteristics of Interleaved Shell-Electrode Detector

Ya Zhang, Chuan Liao, Zheng LiProceedings of the 2nd International Forum on Management, Education and Information Technology Application (IFMEITA 2017) 2018 · DOI

Abstract An Interleaved Shell-Electrode Detector (ISED), based on the Closed Shell-Electrode Detector (CSED), is proposed for the improvement of charge collection efficiency by reducing the dead region. The novel design concept of ISED will be discussed in detail. Full 3D simulations of detector electric properties including profiles of electric potential and electric field have been carried out using a SILVACO TCAD tool. The dead region introduced by interleaved shell electrodes in an ISED single cell (the unit cell) that can form an effective array is half of that in a CSED. The disturbance of the electric properties by introducing interleaved shell electrodes in an ISED is minimum and kept in two localized corners in a square shaped single cell. Other detector properties such as detector full depletion voltage, capacity, breakdown voltage, and I-V and C-V characteristics have also been simulated, and results will be given.

Introduction

In high-energy physics and astrophysics, silicon detectors must be fast, sensitive, and radiation-tolerant. Traditional 2D planar detectors often struggle with radiation damage, leading to the development of 3D detectors where electrodes penetrate the silicon bulk to shorten the charge collection distance.

However, 3D detectors face a mechanical "catch-22." To maximize charge collection, designers aim for a "trench" electrode that completely surrounds the collection column (a Closed Shell-Electrode). But etching a trench entirely through a silicon wafer would cause the center of the detector cell to fall out. To prevent this, unetched silicon "bridges" are left to maintain mechanical integrity. These bridges create "dead regions" with very low electric fields where charge carriers move slowly and are often trapped by defects, leading to poor signal quality and lower efficiency.

The Interleaved Shell-Electrode Detector (ISED) Design

To address the dead region problem, researchers have proposed the Interleaved Shell-Electrode Detector (ISED). This approach utilizes a clever geometric trick to maintain mechanical stability while minimizing unetched areas.

Figure 1: (a) 3D model of the ISED unit cell showing 'A' and 'B' regions; (b) Top view; (c) Array layout; (d) Bottom view.

As shown in Figure 1, the ISED design employs interleaved geometry:

  • Interleaved Etching: A square-shaped trench is etched from the top side of the wafer, while a hexagon-shaped trench is etched from the bottom side.
  • Overlapping Fields: These two trenches are interleaved vertically. They overlap in most areas to create a nearly continuous electrode shell, but leave specific "A" and "B" regions unetched to maintain mechanical stability.
  • Unit Cell and Array: The unit cell (200 µm thickness, p-type silicon bulk, and n-type trenches) can be tiled to form an effective detector array, as seen in Figure 1(c).

Simulation and Key Insights

The team used SILVACO TCAD to model the 3D electrical properties of the ISED. The simulations revealed that by switching from a single-sided closed shell (CSED) to an interleaved top-and-bottom design, the dead region volume is reduced by 50% compared to the CSED and by nearly 100x compared to older 3D-trench designs.

A critical finding was the "hole shielding" effect in the "A" regions where trenches are interleaved. While electrons can still be collected, holes are prevented from drifting to the center electrode. This confirms why these specific areas remain "dead" and highlights why minimizing their volume to just 0.15% of the total detector volume is a significant achievement.

Key Results

The 3D simulations yielded several promising electrical characteristics for the ISED:

  • Dead Region Reduction: The dead region occupies only 0.15% of the ISED volume, compared to 0.3% in CSED and roughly 15% in standard 3D-trench detectors.
  • Operating Voltages: The detector reaches full depletion at a remarkably low voltage of approximately 1 V. Conversely, the simulated breakdown voltage is 214 V, providing a massive safe operating window.
  • Capacitance and Current: The stable capacitance is approximately 40 fF, which helps minimize electronic noise in readout systems. The design also maintains a stable and low leakage current of 1.5 × 10⁻⁸ A.

Conclusion

The ISED design represents a significant step forward in 3D silicon detector technology, effectively halving the dead region of previous state-of-the-art designs while maintaining structural integrity. While these TCAD simulations demonstrate excellent electrical properties and a wide operating margin, future work must focus on physical fabrication. Testing the feasibility of the double-sided interleaved etching process and verifying radiation hardness in real-world environments will be essential next steps for moving the ISED from a computational model to a functional experimental tool.

Summary updated

Abstract

An Interleaved Shell-Electrode Detector -ISED (Chinese patent #zl201721077852.6), based on the Closed Shell-Electrode Detector (CSED), is proposed for the improvement of charge collection efficiency by reducing the dead region. The novel design concept of ISED will be discussed in detail. Full 3D simulations of detector electric properties including profiles of electric potential and electric field have been carried out using a SILVACO TCAD tool. The dead region introduced by interleaved shell electrodes in an ISED single cell (the unit cell) that can form an effective array is half of that in a CSED. The disturbance of the electric properties by introducing interleaved shell electrodes in an ISED is minimum and kept in two localized corners in a square shaped single cell. Other detector properties such as detector full depletion voltage, capacity, breakdown voltage, and I-V and C-V characteristics have also been simulated, and results will be given.
BibTeX
@inproceedings{zhang2018d,
  author = {Ya Zhang and Chuan Liao and Zheng Li},
  title = {{3D Simulations of Electrical Characteristics of Interleaved Shell-Electrode Detector}},
  booktitle = {Proceedings of the 2nd International Forum on Management, Education and Information Technology Application (IFMEITA 2017)},
  year = {2018},
  doi = {10.2991/ifmeita-17.2018.96},
}
Figure