3D printing of liquid crystal elastomers-based actuator for an inchworm-inspired crawling soft robot

Xiaowen Song, Weitian Zhang, Haoran Liu, Limeng Zhao, Qi Chen, Hongmiao TianFrontiers Robotics AI 2022 · DOI

TL;DR

This paper presents a novel inchworm-inspired crawling soft robot built using 3D-printed liquid crystal elastomers (LCEs). By optimizing 3D printing parameters and incorporating anisotropic fish-scale-like microstructures for locomotion, the researchers have created a versatile soft robot capable of efficient movement across various surfaces.

What Problem Does This Paper Address?

Soft robots offer unique advantages like compliance and safe human interaction, making them ideal for navigating complex environments. A key challenge in their development is creating effective soft actuators that can produce controlled motion. Liquid crystal elastomers (LCEs) are promising materials for soft actuation due to their large strain and fast response, but their practical application has been limited by difficulties in precisely aligning the liquid crystal mesogens and fixing them within polymer networks. Conventional methods struggle with creating complex 3D LCE structures with controlled alignment. This paper addresses this by leveraging advanced 3D printing techniques to overcome these limitations and integrate LCEs into a functional robotic system.

Methods

The core of this research lies in the Direct Ink Writing (DIW) 3D printing technique. The authors meticulously optimized DIW parameters such as printing speed, temperature, extrusion pressure, nozzle diameter, and printing height to achieve LCE filaments with superior actuation performance (larger strain and stress).

To enable locomotion, they designed and fabricated anisotropic tilted fish-scale-like microstructures using PDMS. These microstructures were created through photolithography and molding, with varying tilt angles (0°, 30°, and 45°) to investigate their effect on anisotropic friction.

The inchworm robot itself is constructed with a main body comprising an electrothermal film (made from multi-walled carbon nanotubes on a polyimide film) and the 3D-printed LCE actuator. This assembly is then integrated with the anisotropic friction feet. When voltage is applied to the electrothermal film, it heats up, causing the LCE to contract and bend the robot's body. Releasing the voltage allows the LCE to cool and return to its original shape, driving the robot forward through the differential friction provided by the fish-scale feet.

Datasets

Not discussed in the paper.

Key Insights and Ideas

  • DIW as a Game-Changer for LCEs: The study demonstrates that DIW printing is a powerful tool for precisely controlling the 3D shape and alignment patterns of LCEs, overcoming limitations of traditional fabrication methods.
  • Anisotropic Friction is Key to Inchworm Locomotion: The fish-scale-like microstructures are crucial for directional movement. The research highlights how the tilt angle of these scales directly influences the anisotropic friction, with a 45° angle proving most effective.
  • Synergy of Actuation and Locomotion: The integration of a thermally actuated LCE with anisotropic friction feet creates a functional, bionic inchworm robot that mimics natural locomotion.
  • Parameter Optimization is Critical: The paper meticulously maps the relationship between printing parameters and LCE actuation performance, showing how subtle changes can significantly impact the material's response.

Key Results

  • The optimized 3D printing process yielded LCE filaments with significant actuation strain, reaching up to 47.46% at 35°C printing temperature.
  • The anisotropic friction of the fish-scale-like microstructures was successfully demonstrated, with a 45° tilt angle showing the greatest difference in friction between forward and backward movement (approximately 0.04 N difference).
  • The fabricated inchworm-inspired soft robot achieved a crawling speed of approximately 4.3 mm/min on a Petri dish surface when operated at 30 V.
  • The robot demonstrated robust locomotion across various surfaces, including filter paper, plexiglass with a convex spherical array, and sandpaper, showcasing its versatility.

Limitations and Future Work

  • Heat Transfer Efficiency: The paper notes that the electrothermal film's heat transfer to the LCE is somewhat hindered by the PDMS and LCE wrapping, leading to a longer stretching time for the robot. Future work could focus on improving heat transfer for faster actuation.
  • Front Foot Anisotropy: While the rear foot exhibits good anisotropic friction, the front foot's performance is less consistent. This is attributed to changes in force during actuator contraction, suggesting further refinement of foot design or actuator-foot interaction is needed.
  • Universality of Surfaces: While the robot moves on different surfaces, the speed varies. The paper suggests that optimizing the anisotropic friction for specific surface types could further enhance performance.
  • Integration of Control: The current robot is actuated by direct voltage application. Future research could explore integrating more sophisticated control systems for more complex behaviors and autonomous operation.

Summary updated

BibTeX
@article{song2022d,
  author = {Xiaowen Song and Weitian Zhang and Haoran Liu and Limeng Zhao and Qi Chen and Hongmiao Tian},
  title = {{3D printing of liquid crystal elastomers-based actuator for an inchworm-inspired crawling soft robot}},
  journal = {Frontiers Robotics AI},
  year = {2022},
  doi = {10.3389/frobt.2022.889848},
}
Figure