2A1-S-063 Autonomous Control of Blimp for Indoor Experiment (2)(Flying Robot 3,Mega-Integration in Robotics and Mechatronics to Assist Our Daily Lives)

Yasushi Hada, Issei Tomita, Kuniaki Kawabata, Hayato Kaetsu, Hajime Asama, Norihiro Goto, Daisuke Kurabayashi, Yoji KurodaThe Proceedings of JSME Annual Conference on Robotics and Mechatronics (Robomec) 2005 · DOI

Introduction

Following catastrophic earthquakes, searching for survivors inside damaged or unstable buildings is a high-risk task for human rescue teams. While ground-based robots are often hindered by debris, aerial robots provide a superior vantage point. However, traditional multi-rotor drones pose risks in confined spaces due to high-speed propellers and the potential for crashes upon power failure.

This research proposes a safer alternative: a small, autonomous indoor blimp. Blimps are inherently buoyant, move at slower, safer speeds, and can hover for extended periods with minimal power consumption. The primary challenge addressed in this work is the "Mega-Integration" of robotics—fusing precise position estimation and autonomous navigation within indoor settings where GPS is unavailable.

Control System Architecture

The researchers developed a hierarchical autonomous flight system designed to handle the unique dynamics of a lighter-than-air vehicle. The system architecture, as illustrated in the control block diagram, separates high-level navigation from low-level stabilization.

Control block diagram showing the hierarchical architecture of the blimp's autonomous flight system.

Key components of this architecture include:

  • State Estimation: This module processes data from sensors—including accelerometers and geomagnetic compasses—to estimate the blimp's position (X, Y, Z), velocity, and orientation. In experimental setups, a "Total Station" provides external ground-truth positioning.
  • Nested Control Loops: The system utilizes a Position Controller to manage spatial coordinates and a Yaw Controller to maintain the desired heading.
  • Kinematics & Dynamics Modeling: Control outputs are processed through mathematical models of the blimp's physics to generate precise actuator commands.

Experimental Results

The effectiveness of the proposed system was verified through indoor flight trials. The research successfully demonstrated that the modular control architecture could maintain stable flight and accurate position estimation without the aid of GPS.

The autonomous blimp during an indoor flight experiment.

The trials confirmed the viability of the blimp platform for search-and-rescue missions. By prioritizing "soft" robotics and safety-centric design, the system ensures that the robot can operate near potential victims and fragile structures without causing further harm.

Conclusion and Future Work

This second report on the autonomous blimp project highlights the successful integration of sensing, planning, and control. Future developments will focus on enhancing the sensor suite for more complex environments, potentially incorporating thermal cameras or CO2 sensors for victim detection, and testing the system in unstructured environments that more closely simulate earthquake rubble.

Summary updated

BibTeX
@inproceedings{hada2005s,
  author = {Yasushi Hada and Issei Tomita and Kuniaki Kawabata and Hayato Kaetsu and Hajime Asama and Norihiro Goto and Daisuke Kurabayashi and Yoji KURODA},
  title = {{2A1-S-063 Autonomous Control of Blimp for Indoor Experiment (2)(Flying Robot 3,Mega-Integration in Robotics and Mechatronics to Assist Our Daily Lives)}},
  booktitle = {The Proceedings of JSME Annual Conference on Robotics and Mechatronics (Robomec)},
  year = {2005},
  doi = {10.1299/jsmermd.2005.177\_3},
}
Figure