1007 Development of a Search Type Rescue Robot Driven by Pneumatic Actuator

Kengo Harihara, Shujiro Dohta, Tetsuya Akagi, Feng ZhangThe Proceedings of Conference of Chugoku-Shikoku Branch 2010 · DOI

Abstract: Recently, large earthquakes, including the Hanshin-Awaji (Kobe) Earthquake, have resulted in significant loss of life. To improve victim recovery efforts, various rescue robots have been developed. However, most existing designs utilize electric actuators for mobility, which present risks of electrical failure or shock in the wet, debris-filled environments typical of disaster zones. This study proposes a search-type rescue robot utilizing pneumatic and flexible actuators to enhance resilience against physical and electrical shocks. We present two robot types: a compact crawler unit using flexible pneumatic cylinders and a larger unit powered by a pneumatic motor and novel long-stroke artificial rubber muscles. This paper details the structure, operational principles, and performance of these prototypes.

Introduction

Disaster environments following earthquakes or floods are often characterized by the presence of water, mud, and sediment. In these "wet environments," traditional electric motors are vulnerable to short-circuiting. Furthermore, an electrically powered robot could inadvertently become a hazard to victims or rescuers. Pneumatic systems offer an inherently safe alternative; air is compliant, providing natural shock absorption, and is non-conductive, making it ideal for wet or potentially explosive (gas leak) conditions.

Robot Architecture and Design

The developed prototype is a modular system approximately 550mm in length and weighing 6kg. It is divided into three primary functional sections:

  1. Bending Unit: Located at the front, this unit provides directional control. It consists of four artificial muscles arranged around a central axis. By selectively pressurizing these muscles, the robot can tilt its head to navigate around obstacles.
  2. Valve Control Unit: This central "brain" houses a Renesas H8/3664 microcontroller and 19 solenoid valves. While the actuators are pneumatic, this unit is waterproofed to protect the necessary electronic control logic.
  3. Mobile Unit: The propulsion system at the rear, which drives the robot forward using a radial piston air motor.
The complete assembly of the search-type rescue robot, measuring 550mm in length, showing the modular bending, valve control, and mobile units.

Actuation Mechanisms

Long-Stroke Pneumatic Artificial Muscles

Standard McKibben-type artificial muscles typically suffer from a limited range of motion. To overcome this, the researchers developed a "long-stroke" variant. This design incorporates a rolling-contact slide stage using 5mm steel balls to drastically reduce friction. This allows the muscle to achieve significant displacement even at low pressures (starting at 64kPa), while maintaining a robust seal up to 500kPa.

The six-step operational cycle of the long-stroke pneumatic artificial muscle, demonstrating the supply and exhaust phases that generate movement.

Propulsion and Variable Geometry

The mobile unit utilizes a TAIYO radial piston air motor to drive 12 spherical tires via a complex arrangement of gears and chains. A key feature of this unit is its variable geometry: a pneumatic cylinder allows the outer frame to expand or contract, changing the robot's diameter from 290mm to 490mm. This capability allows the robot to wedge itself into voids for better traction or shrink to navigate narrow gaps in rubble.

Performance and Results

Functional testing of the prototype confirmed several key capabilities:

  • Mobility: The air motor successfully powered the spherical tires for both forward and backward travel.
  • Adaptability: The opening/closing mechanism functioned reliably, allowing for a 200mm change in diameter during operation.
  • Control: A wired control system successfully translated PC-based character codes into valve sequences, enabling remote operation of the robot's various pneumatic functions.

Conclusion and Future Work

The prototype demonstrates the viability of fully pneumatic propulsion for rescue operations in hazardous environments. By eliminating electric motors at the point of contact, the design achieves high physical and electrical resilience. Future research will focus on integrating the bending unit's directional control during active travel, further improving the waterproofing of the central control unit, and exploring wireless pneumatic control schemes to increase the robot's operational range and autonomy.

Summary updated

Abstract

Recently, the large earthquake including Hanshin-Awaji (Kobe) Earthquake has occurred. A lot of lives have been lost due to these earthquakes. In order to find and save victims even one, many researches and developments of the rescue robot have been done. In such studies, most of the rescue robot used the electric actuator for travelling. In those cases, there is a possibility of getting an electric shock because of electricity. Comparing with electric actuators, the pneumatic and flexible actuators and devices can make the robot stronger against the electric shock and physical shock. In this study, we aim to develop the search type rescue robot with flexible structure. We propose two types of robot. First, we propose and test a lightweight and compact search type rescue robot using the flexible pneumatic cylinder and crawler unit. Second, we propose and test the rescue robot using a pneumatic motor and the long stroke type artificial rubber muscles. This paper describes the structure, the principle of operation and the performance of the tested robots.
BibTeX
@inproceedings{harihara2010development,
  author = {Kengo Harihara and Shujiro Dohta and Tetsuya Akagi and Feng Zhang},
  title = {{1007 Development of a Search Type Rescue Robot Driven by Pneumatic Actuator}},
  booktitle = {The Proceedings of Conference of Chugoku-Shikoku Branch},
  year = {2010},
  doi = {10.1299/jsmecs.2010.48.303},
}
Figure