Abstract: The ship lock with water saving basins can store part of water during the operation, which has the outstanding advantage of saving water resources. At the same time, the water-saving ship lock can divide the total water head into stages, significantly reduce the operating head of each stage, which can provide technical conditions for simplifying the ship lock’s filling & emptying system and improving the operating conditions of lock’s valves. For ship lock with high head and large water level variation, the layout of the saving basins and the division of water level are very important. They determine the overall layout, operation efficiency and safety performance of the ship lock. With the increase of water head and water level variation, the classification arrangement of water-saving ship lock will become very complex. Therefore, based on the Baishi water-saving ship lock project (60 m-class, ultra-high head), the analysis and calculation research are carried out in this paper. First of all, the influence laws of key factors such as water-saving rate, number of water saving basins, area of water saving basins and operating head on water level division are obtained. On this foundation, a reasonable water level classification scheme for 60m-class ship lock is proposed, and the hydraulic characteristics of ship lock under different operating conditions are analyzed, and the feasibility of ship lock layout scheme is demonstrated. The research results can provide direct technical support for Baishi ship lock project, and provide reference for the design and construction of similar water-saving ship lock projects.
Introduction
Ship locks are critical infrastructure for navigation past dam projects, but as dam heights increase, so do the challenges for lock design. "High head" locks, where the water level difference is substantial, face two primary hurdles: extreme hydraulic intensity and massive water consumption. A single-stage 60-meter drop, like that required for the Baishi hydropower station in China, creates immense pressure on valves and filling systems, often exceeding the limits of mature engineering technology which typically tops out around 40 meters. Furthermore, traditional locks discharge a massive volume of water with every cycle, representing a significant economic loss in water-scarce regions or for power-generating dams.
This study explores the feasibility of a 60m-class "ultra-high head" ship lock using multi-stage water-saving basins (WSBs). By storing water during the emptying process and reusing it for filling, these systems reduce both water waste and the effective operating head per stage.
Design Layouts and Classification
The arrangement of water-saving basins is a fundamental design choice that impacts structural integrity and hydraulic efficiency. The researchers evaluated two primary configurations: the "closed integral" type and the "open decentralized" type.
In the closed integral type, the basins are integrated directly into the lock wall structure. While compact, this can lead to massive structural loads. Conversely, the open decentralized layout places basins separately, often utilizing the natural terrain. For ultra-high head projects like Baishi, the open decentralized layout is preferred as it offers greater flexibility in water level division and simplifies the construction of the large basin volumes required.
Methodology and Hydraulic Principles
The research combined theoretical derivation with project-specific calculations. The authors established mathematical models based on mass conservation to relate the number of stages ($n$), the area ratio of the basins to the lock chamber ($m$), the resulting operating head ($H_n$), and the water-saving rate ($E_S$).
As shown in the schematics above, the total head is subdivided into smaller increments ($H_L$). During the filling process (a), water is sequentially released from the basins into the chamber. During emptying (b), water is captured back into the basins. This subdivision is the "aha" moment of the design: it moves the project from experimental territory into the range of mature 20–25m head technology.
To provide context, the authors benchmarked the Baishi project against 15 of the world’s highest ship locks, including the Three Gorges and Carrapatelo locks, highlighting the unprecedented nature of a 60m single-step design.
Key Insights and Results
The analysis revealed a "law of diminishing returns" regarding the number of basins. While more stages increase efficiency, the benefits drop off significantly after $n > 4$ and an area ratio ($m$) $> 2.0$. For the Baishi project, a 3-stage system with an area ratio of 1.0 was identified as the optimal balance between construction complexity and performance.
Key performance metrics for this 3-stage configuration include:
- Water Saving: A theoretical water-saving rate of 60.0%.
- Operational Efficiency: Total filling and emptying times are approximately 24 minutes, meeting the design requirement of staying under 25 minutes.
- Flow Dynamics: Maximum flow rates from the basins reach 106–112 m³/s, while the lock head manages 216–244 m³/s.
- Safety: Maximum culvert velocities were calculated at 10.59–11.95 m/s, which is within the safe operational limits for modern high-head lock components.
Conclusion
The study demonstrates that 60m-class ultra-high head locks are technically feasible through the strategic use of multi-stage water-saving basins. By reducing the effective operating head to approximately 20-25m per stage, the design leverages existing, reliable technology to solve an extreme engineering challenge. Future work will involve physical scale modeling to validate these theoretical hydraulic indexes and the development of automated control systems to synchronize the complex multi-stage valve operations.
Summary updated