Single-track pipeline templates
Lists
Only you see this
Abstract
The single-track protocol, introduced in Chapter 2, was initially proposed by van Berkel and Blink as a communication method for bundled-data pipeline controllers. As an example, Figure 13.1 shows a single-track synchronization channel implemented with a single wire between a sender and a receiver. In this example, the sender sends a synchronization token by driving the channel wire high and the receiver detects the token and resets the channel by resetting the wire low. This is then detected by the sender, which may send a second token by raising the channel wire high again and thus repeating the entire handshaking process. An alternative form of this protocol is also possible in which the sender drives the communication wire low and the receiver drives it high.
BibTeX
@inproceedings{beerel2010single,
author = {Peter A. Beerel and Recep O. Ozdag and Marcos Ferretti},
title = {{Single-track pipeline templates}},
booktitle = {Cambridge},
year = {2010},
doi = {10.1017/cbo9780511674730.013},
}Loading related content...