Research on Development of Color Sorter Using TRIZ

Lihong He, Zhanwen Niu, Dongliang ChenOpenalex Unknown 2006 · DOI · OpenAlex

Abstract

Color Sorters are widely utilized in crop processing industries to ensure product quality. This paper applies the Theory of Inventive Problem Solving (TRIZ) to systematically evolve color sorter design. By identifying technical contradictions and mapping technology evolution, the authors forecast future advancements in optical sensors and propose a shift from mechanical-heavy assemblies to solid-state solutions, such as LCD-based background calibration.

Introduction

Color sorters are essential for separating "good" crops from "rejects" based on color aberrations. However, traditional R&D in this field often relies on incremental, trial-and-error improvements. This research addresses two main challenges: technological forecasting of sensor and feeder technology, and the reduction of mechanical complexity in systems that are prone to wear and precision limits.

Schematic diagram of a typical industrial color sorter system, highlighting the feeder, grooves, and background components.

Methodology: The TRIZ Framework

The authors utilize the TRIZ framework to guide innovation. This approach involves mapping the historical trajectory of components to identify "laws of evolution" and using a contradiction matrix to resolve engineering trade-offs. Specifically, the paper seeks to improve system "applicability" (flexibility for different crop types) without increasing "device complexity."

Technological Evolution of Sensors

A core application of TRIZ in this study is the analysis of the optical signal-collecting system. The evolution from unilateral silicon "electric eyes" to line-scan CCDs represents a "transition to the micro-level," where sensitivity is increased by subdividing sensors.

Technology evolution map of color sorter sensors from Generation One to Five, showing the transition toward multicolor area-scan CCDs.

The paper forecasts that "Generation Five" will utilize multicolor area-scan CCDs. This shift allows for the capture of more complex spectral data, moving beyond simple monochromatic detection to provide more valuable agricultural insights.

Design Innovations and Results

Eliminating the "Groove Gap"

Traditional sorters use grooved channels to guide particles. While this prevents overlap, it leaves significant "dead space" between grooves. The authors propose moving to a flat-plate feeder. Enabled by the higher processing speeds of modern CCDs, this design increases the "work area utilization ratio" by allowing a continuous, high-density flow of material.

Solid-State Backgrounds

The most innovative proposal is replacing the mechanical background board adjustment system. Traditionally, a motor rotates a board to change its reflection angle for different grains. The authors suggest using an LCD panel instead. By adjusting the input voltage to the LCD, the background lightness can be changed instantly without any moving parts, bypassing the limitations of machining and mechanical wear. This represents a significant breakthrough for the precision and reliability of background calibration.

Conclusion and Future Work

The application of TRIZ provides a powerful structured methodology for agricultural machinery design. While the paper provides a strong theoretical foundation for the LCD-based system and flat-plate feeders, future work should focus on empirical validation. Testing these sensitive electronic components in dusty, high-vibration industrial environments will be crucial for successful implementation.

Summary updated

Abstract

Color Sorter has been widely used in crops further processing industries. And it has a broad market in China. Improving product quality or developing new products is very important for enterprises to keep technical advantages in market competitions. Technology evolution theory can forecast the future technology in products. It can guide a designer along the right direction of developing a new product. The solutions from contradictions solving give starting points to solve a problem. According to these solutions, the designer can detail the design using professional knowledge. This paper is organized as follows. Firstly, it proposes to integrate technology evolution and the design of Color Sorter and forecast the future technologies of the Color Sorter parts, such as the optical signal-collecting system and grooves. Secondly, using the contradiction and inventive principle, this paper proposes several solutions for improving the adjust method of background board.
BibTeX
@inproceedings{he2006research,
  author = {Lihong He and Zhanwen Niu and Dongliang Chen},
  title = {{Research on Development of Color Sorter Using TRIZ}},
  booktitle = {Openalex Unknown},
  year = {2006},
  doi = {10.1007/0-387-34403-9\_63},
}
Figure