Abstract
In a collaboration between Fermilab and Los Alamos National Laboratory, inductive inserts composed of ferrite cores were installed in the Proton Storage Ring (PSR) to mitigate space-charge potential-well distortion and raise the threshold for the two-stream e-p instability. While initial implementation triggered a parasitic microwave-like instability, researchers discovered that heating the ferrite cores to approximately 130°C effectively suppressed these oscillations. This thermal tuning allowed for a record beam accumulation of 9.7 $\mu$C/pulse. This paper summarizes the inductor characteristics, the discovery of thermal tuning, and the resulting performance improvements now integrated into routine PSR operations.
The Challenge of High-Intensity Beams
High-intensity proton beams in storage rings like the PSR are limited by collective effects, most notably the space-charge force. As protons are packed more densely, their mutual repulsion distorts the longitudinal potential well, leading to instabilities—specifically the electron-proton (e-p) instability—that cause beam loss.
To counteract this, physicists employ inductive inserts: cavities containing ferrite cores that provide an inductive voltage to cancel the capacitive space-charge force. However, achieving full compensation introduced a new hurdle. At high intensities, the resistive component of the ferrite impedance triggered a high-frequency "microwave-like" instability. This manifested as significant ripples on the beam profile, disrupting the bunch structure.
Methodology: Thermal Tuning of Ferrites
The researchers utilized Toshiba $M_4C_{21A}$ ferrite cores. The behavior of these cores is governed by their complex permeability, $\mu = \mu' + i\mu''$, where $\mu'$ contributes to the desired inductance and $\mu''$ represents resistive losses.
The breakthrough came from the observation that the magnetic properties of these ferrites are highly temperature-dependent. By wrapping the inserts in heating tapes and raising the temperature to 130°C, the team manipulated the permeability. Crucially, heating increased the "good" inductance ($\mu'$) while dramatically reducing the "bad" resistive loss ($\mu''$) at the frequencies of interest. Measurements showed that the resonant loss peak dropped by a factor of six when the cores were heated to 100°C, effectively pushing the beam back into a stable regime.
Key Results and Performance Gains
The implementation of heated inductive inserts yielded immediate and significant improvements in machine performance. The primary metric for success was the threshold intensity—the maximum beam charge that can be accumulated before instability occurs—plotted against the RF buncher voltage.
Key achievements include:
- Record Accumulation: The team reached a record intensity of 9.7 $\mu$C/pulse, limited only by the capacity of the feeding linac.
- Instability Suppression: Heating the ferrites to 130°C completely eliminated the disastrous longitudinal distortions in 100 ns bunches.
- Enhanced Landau Damping: By compensating for space charge, the inserts increased the beam's momentum spread, which naturally suppresses instability growth through Landau damping.
- Operational Efficiency: The PSR now routinely operates at 8 $\mu$C/pulse. Furthermore, the ability to maintain stable, longer bunches (290 ns vs 250 ns) resulted in approximately $15,000 per month in power savings for the linac.
Conclusion and Future Directions
The use of heated inductive inserts has proven to be a robust solution for overcoming space-charge limits at the PSR. While the record intensity of 9.7 $\mu$C/pulse was a landmark achievement, it was accompanied by beam losses of approximately 5%. While acceptable for short-term studies, such losses are too high for high-repetition-rate production due to component activation.
Future work will focus on minimizing these losses and managing the transverse emittance growth associated with high peak currents. Nevertheless, the engineered version of these heated inductors is now a staple of routine PSR operations, demonstrating that unconventional solutions like "thermal tuning" can solve complex problems in accelerator physics.
Summary updated