Abstract: Passive source localization is a key issue in sensor array signal processing such as sonar, radar, wireless communication, microphone array speech processing, seismology, electronic surveillance and medical imaging, and thus receives significant attention. Although a variety of advanced algorithms, for example MUltiple SIgnal Classification (MUSIC), Estimation of Signal Parameters via Rotational Invariance Techniques (ESPRIT), and Propagator Method (PM), have been developed, there are still some problems: (i)For twodimensional (2D) directions-of-arrival (DOA) estimation, the failure in pairing causes severe performance degradation; (ii) In some practical applications, the signals received by a sensor array may come from multiple near-field sources or multiple far-field sources or their mixture. Due to different signal models for near-field and far-field sources, the existing algorithms cannot deal with them simultaneously well; and (iii) For joint azimuth and elevation direction finding, the existing estimators often encounter an estimation failure problem especially when elevation angles are between 70 and 90 degrees. In this chapter, several high-resolution methods are presented to overcome these difficulties.
Introduction
Passive source localization—the process of determining a signal's origin by listening rather than active pinging—is a cornerstone of modern sensor array processing. While industry-standard algorithms like MUSIC and ESPRIT are powerful, they suffer from practical limitations: the "pairing problem" in 2D estimation, the inability to handle mixed near-field and far-field sources, and mathematical instability at high elevation angles. This paper by Junli Liang and Ding Liu proposes three high-resolution refinements to address these "blind spots."
Methodology and Array Geometry
A primary challenge in 2D direction finding is correctly matching calculated azimuths with their corresponding elevations. A single mismatch can lead to catastrophic localization errors. To solve this, the authors focus on the L-shaped array geometry.
By introducing a "novel electric angle," the authors mathematically transform the L-shaped array's steering vector. This allows for the recovery of angles directly from eigenvectors using rank-reduction ESPRIT, effectively bypassing the error-prone pairing step.
Additionally, the paper introduces a Two-Stage MUSIC algorithm using fourth-order cumulants to resolve mixed-field sources. This approach suppresses Gaussian noise and creates a unified model for both distant (far-field) and nearby (near-field) signals. To fix high-angle instability, a Hybrid Elevation Estimator is developed that switches between trigonometric logics to maintain stability near 90 degrees.
Key Results and Performance
The proposed algorithms were evaluated using Monte Carlo simulations across varying Signal-to-Noise Ratios (SNR) and snapshot counts.
As shown in Figure 3, the proposed pairing-free method consistently achieves lower Root Mean Square Error (RMSE) than conventional ESPRIT, particularly in low-SNR environments where pairing swaps typically degrade performance. Furthermore, the hybrid estimator maintained a 0% failure rate across all angles, whereas traditional arcsin-based methods saw failure rates spike to 50% as elevation approached 90 degrees.
Conclusion
By leveraging geometric transformations and higher-order statistics, this research provides a more robust framework for passive sensing. While the current work is simulation-based and computationally intensive due to the use of cumulants, it sets the stage for more reliable localization in complex, real-world environments. Future research will aim to extend these pairing-free techniques to circular and rectangular array geometries.
Reference: Liang, J., & Liu, D. (2012). Passive Source Localization of Sensor Arrays. In: Yang, W. (Ed.), Sensor Array. InTech. DOI: 10.5772/36350.
Summary updated