Improving Performance and Reliability of MOS Devices Using Deuterium Implantation

Jaesung LeeInTech 2010 · DOI · OpenAlex

Abstract

As silicon integrated circuits (ICs) scale toward submicron dimensions, maintaining the reliability of thin gate oxides becomes a critical challenge. This paper explores the use of deuterium ion implantation to replace traditional hydrogen passivation at the $Si/SiO_2$ interface. By exploiting the kinetic isotope effect, deuterium forms more resilient bonds that significantly suppress interface trap generation, leading to substantial improvements in device lifetime and stability against hot carrier injection (HCI) and negative bias temperature instability (NBTI).

Introduction

The rapid advancement of digital communication systems relies on high-density, high-speed silicon ICs. A key bottleneck in this progression is the degradation of thin silicon dioxide ($SiO_2$) gate insulators. In short-channel metal-oxide-semiconductor field-effect transistors (MOSFETs), high electric fields generate "hot" electrons that break the chemical bonds used to passivate interface defects. Traditionally, hydrogen is used for this passivation, but Si-H bonds are susceptible to electrical stress, leading to device instability and failure over time.

The Kinetic Isotope Effect

The core scientific principle behind this work is the kinetic isotope effect. Deuterium, being twice as heavy as hydrogen, forms a Si-D bond with a different vibrational frequency than the Si-H bond. This makes the Si-D bond significantly more resistant to desorption by energetic "hot" electrons. Experimental data shows that a much higher current is required to achieve the same desorption yield for deuterium compared to hydrogen, confirming the superior robustness of the Si-D bond.

Desorption yield of hydrogen vs. deuterium, demonstrating the kinetic isotope effect where deuterium requires higher current for desorption.

Methodology: Deuterium Ion Implantation

To overcome the limitations of traditional thermal diffusion—which is often blocked by metal layers or silicon nitride spacers in modern ICs—this study utilizes deuterium ($D^+$) ion implantation. This "back-end" process, performed after the first metallization layer, allows for precise placement of deuterium at the gate oxide interface even in complex, multi-level chip architectures. The researchers used TRIM (Transport of Ions in Matter) simulations to calculate the exact energy and dose required to target the gate oxide region without damaging surrounding structures.

Schematic of deuterium ion ($D^+$) implantation into the gate oxide of a MOSFET structure.

Key Results and Reliability Improvements

Experimental results demonstrate that deuterium-implanted devices exhibit significantly lower gate leakage and smaller threshold voltage shifts under electrical stress compared to their hydrogen-passivated counterparts. Key findings include:

  • Lifetime Extension: Transistor lifetimes are estimated to be extended by 10 to 50 times due to the suppression of interface trap generation.
  • Stress Resistance: D-implanted devices showed superior resistance to both HCI and NBTI, maintaining stable saturation currents during accelerated aging tests.
  • Dose Sensitivity: The study identified a critical threshold; while deuterium improves reliability, an excessive dose can introduce new defects, meaning the process must be precisely tuned for optimal performance.

Conclusion

Deuterium ion implantation offers a robust solution for enhancing the reliability of next-generation MOS devices. By replacing weak Si-H bonds with more stable Si-D bonds, manufacturers can significantly extend the operational life of high-performance transistors. While dose sensitivity remains a challenge, the technique's compatibility with standard CMOS processes makes it a promising candidate for advanced semiconductor manufacturing.

Summary updated

Abstract

Our advancing information network society is based on various kinds of digital communication systems in which versatile silicon integrated circuits (ICs) are indispensable key components. For the next-generation networking systems, there is need for higher packing density, higher quality and higher speed of ICs. Much effort is needed to improve the quality of thin silicon dioxide (SiO2) used in submicron metal-oxide-semiconductor (MOS) field-effect transistors (FETs) in ICs. Since MOSFETs with thermal SiO2 were developed in 1960, SiO2 has been widely used as a gate insulator in MOSFETs and has played an important role in rapidly advancing IC development. The quality of the gate insulator or gate oxide is closely related to the control of driving current, which is one of the most important factors for the MOS device. From this point of view, the practical minimum value of gate oxide thickness is below 2 nm at present, and at the same time, defect-free oxide must be prepared for both gate oxide and inter-gate oxide. Many kinds of contaminations from various processes and electrical-stressed-induceddamage on SiO2 and the Si-SiO2 interface must be extensively examined and removed. Progressive silicon complementary MOS (CMOS) IC technologies are also based on reductions in the channel lengths of MOSFETs as well as on reductions in the gate oxide thickness. The reduction in the channel lengths leads to an increase in hot electron generation (for n-channel MOSFETs) owing to an increase in the electric field applied to the channel. The reduction in the gate-oxide film thickness results in an increase in the electric field applied to the thin gate-oxide films. Hot electron generation in short channel MOSFETs is followed by electron trapping in gate oxides on the silicon substrates. The electron trapping in gate oxides is the principal cause of instability for short channel MOSFETs, and electron traps in as-grown oxides need to be studied extensively. At any rate, improvement in the quality and reliability of thin SiO2 is one of the most important concerns for nextgeneration MOS IC development. The central theme of this work is to characterize the electrical reliability of MOS devices related to the nature of thin SiO2 film. This monograph deals with hydrogen or deuterium process employed in fabrication to improve MOS device’s reliability. The process of postmetallization anneal of the wafers at a low temperatures in hydrogen ambient is critical to CMOS fabrication technology to improve MOS device function by passivating the otherwise 2
BibTeX
@inproceedings{lee2010improving,
  author = {Jaesung Lee},
  title = {{Improving Performance and Reliability of MOS Devices Using Deuterium Implantation}},
  booktitle = {InTech},
  year = {2010},
  doi = {10.5772/8856},
}
Figure