Guest Editorial Wireless Transmission of Information and Power—Part I

Bruno Clerckx, Rui Zhang, Robert Schober, Derrick Wing Kwan Ng, Dong In Kim, H. Vincent PoorIEEE JSAC 2018 · DOI · OpenAlex

Abstract

Wireless Information and Power Transfer (WIPT) has emerged as a critical technology for the burgeoning Internet of Things (IoT) ecosystem. This article, based on the guest editorial for the IEEE Journal on Selected Areas in Communications, explores the state-of-the-art in WIPT. It details the transition from idealized linear models to sophisticated designs that account for nonlinear hardware, finite signal constellations, and complex network topologies, providing a roadmap for the future of self-sustaining wireless networks.

Introduction

The rapid expansion of the Internet of Things (IoT) has brought the challenge of powering billions of low-energy sensors to the forefront of wireless research. While wireless systems have traditionally been optimized solely for high-rate data communication, the need for sustainable, battery-less operation has catalyzed the field of Wireless Information and Power Transfer (WIPT). This technology aims to utilize radio frequency (RF) waves not just as a medium for information, but as a source of controllable energy.

This article summarizes the first of two special issues dedicated to WIPT, curating 15 papers that address the fundamental conflicts between efficient power delivery and high-speed data transmission. The research highlights a significant shift in the field: moving away from idealized theoretical assumptions toward practical system designs that embrace the complexities of real-world hardware.

Overcoming the Linear Model Fallacy

A significant portion of early WIPT research relied on the assumption of "linear" energy harvesters, where the output DC power is directly proportional to the input RF power. However, real-world RF-to-DC conversion circuits—specifically the rectifiers and diodes—are inherently nonlinear.

The papers featured in this special issue address this gap by developing new waveforms and beamforming strategies specifically designed for nonlinear harvesters. A key insight is the role of the Peak-to-Average Power Ratio (PAPR). While high PAPR is often avoided in traditional communications to prevent amplifier distortion, it is highly beneficial for energy harvesting. Signals with high peaks can more effectively overcome the "turn-on" voltage of rectifier diodes, significantly boosting DC conversion efficiency.

Innovations in Waveform and Antenna Design

To exploit these nonlinearities, researchers are moving beyond standard Gaussian signal assumptions. Methodologies summarized in this issue include:

  • Waveform Engineering: Designing multi-sine waveforms that maximize energy harvesting efficiency without compromising data integrity.
  • Advanced Antenna Architectures: The use of Retrodirective Frequency Diverse Arrays (FDA) allows for long-range energy focusing and self-tracking of devices. Similarly, Lens Antenna Arrays are employed to provide high-precision angle-of-arrival estimation, enabling base stations to "track" and power mobile devices more accurately.
  • Spatial Intelligence: By leveraging high-precision spatial focusing, future base stations may be able to deliver targeted energy beams to specific devices even without prior knowledge of their exact location.

Balancing Security, Fairness, and Efficiency

WIPT introduces unique challenges in network management and security. In Simultaneous Wireless Information and Power Transfer (SWIPT) systems, a user intended to harvest energy could also act as a potential eavesdropper on the data stream. This dual-role requires joint optimization of beamforming to maximize "secrecy rates"—ensuring data remains private while still delivering sufficient power to the harvester.

Furthermore, the editorial highlights the importance of "proportional fairness." In multi-user environments, optimization frameworks are needed to ensure that energy is distributed equitably across the network, preventing "near" users from starving "far" users of power. Stochastic geometry is also being applied to analyze how WIPT behaves in massive, heterogeneous networks, particularly in "void cells" where no active users are present.

Key Results and Performance Gains

The technical contributions in this issue report several quantitative improvements:

  • Fairness and Distribution: New optimization models show significant gains in fair energy distribution compared to traditional baseline methods.
  • Range and Tracking: FDA-based schemes have proven superior to conventional phased arrays for long-range power transfer and pilot signal tracking.
  • Feedback Efficiency: Information-theoretic analysis suggests that incorporating channel feedback can potentially double the energy transmission rate at high signal-to-noise ratios (SNR).
  • Protocol Refinement: New relay-assisted protocols for ultra-reliable low-latency communications (URLLC) demonstrate clear benefits over standard Power Splitting (PS) and Time Switching (TS) methods.

Conclusion and Future Outlook

While this first installment focuses heavily on downlink scenarios (base station to device), it sets the stage for the next phase of research. Future work must continue to bridge the gap between simulation and real-world hardware prototyping. The upcoming second part of this special issue will shift focus toward Wirelessly Powered Communication Networks (WPCNs) and Backscatter Communication (WPBC), where devices utilize harvested energy to reflect signals back to the source, completing the cycle of self-sustaining wireless ecosystems.

Summary updated

Abstract

Wireless transmission of information and power has received growing attention in the research community in the past few years. In two consecutive special issues, a total of thirty papers present state-of-the-art results in the broad area of wireless transmission of information and power.
BibTeX
@article{clerckx2018guest,
  author = {Bruno Clerckx and Rui Zhang and Robert Schober and Derrick Wing Kwan Ng and Dong In Kim and H. Vincent Poor},
  title = {{Guest Editorial Wireless Transmission of Information and Power—Part I}},
  journal = {IEEE Journal on Selected Areas in Communications},
  year = {2018},
  doi = {10.1109/jsac.2018.2872371},
}

Loading related content...

Figure