Abstract
The ubiquitous sensor-rich mobile devices (e.g., smartphones, wearable devices, and smart vehicles) have been playing a vital role in the evolution of the Internet of Things (IoT), which bridges the gap between digital and physical spaces. The powerful computing/communication capacities, huge population, and inherent mobility make mobile device networks a much more flexible and cost-effective IoT solution than traditional wireless sensor networks. However, the energy issue of mobile terminals poses significant challenges to the widespread use of IoT: not only the mobile terminals have short lifetime with the proliferation of mobile applications but also the current networking and communication technologies are not adequately taking the energy efficiency into account. Therefore, the sustainable issue of IoT has attracted considerable attention from both academia and industry. Wireless energy harvesting (EH), and transfer technology was recently proposed as an effective mean to address this issue. It enables the mobile terminals to harvest energy from the ambient environment to prolong its battery. Although some forms of EH have been applied to WSNs, networking and communication solutions must be redesigned for wireless powered IoT with massive number of mobile terminals.
Introduction: Addressing the Energy Bottleneck
The "Internet of Things" (IoT) promises a world of ubiquitous, sensor-rich devices, but it faces a fundamental physical limit: power. Mobile terminals and remote sensors have short battery lives, and the sheer scale of the IoT makes manual recharging or battery replacement logistically impossible and environmentally damaging.
Current networking and communication protocols were largely designed for performance, not extreme energy autonomy. This editorial introduces a special issue of the IEEE Internet of Things Journal dedicated to Wireless Energy Harvesting (EH). It curates 24 high-quality research papers that tackle the "energy bottleneck" of the IoT, moving beyond traditional batteries toward sustainable, self-powering networks through techniques like backscattering, SWIPT, and advanced RF channel modeling.
Methodology and Selection
As a guest editorial, this document outlines the rigorous selection process used to curate the special issue. Out of 95 global submissions, 24 papers were selected after a two-round peer-review process.
The included papers employ a wide array of advanced methodologies to solve EH challenges:
- Hardware Prototyping: Developing physical backscattering tags and multiband RF harvesting circuits.
- Mathematical Modeling: Utilizing discrete-time Markov chains, non-convex optimization, and Stackelberg game theory to model network behavior and incentive structures.
- Algorithmic Optimization: Creating new frameworks for "Accumulate Then Transmit" protocols, MISO (Multiple-Input Single-Output) beamforming, and energy-aware routing for specialized environments like nanosatellite networks.
While the editorial does not introduce a single central dataset, it highlights that the included research utilizes realistic RF signal data (e.g., LTE 700 MHz, GSM 850 MHz, and ISM 900 MHz bands) and simulated environments to evaluate packet loss, throughput, and outage probability in complex cognitive radio and relay networks.
Key Insights and Breakthroughs
The editorial highlights several "aha moments" from the curated papers that challenge standard assumptions in wireless design:
- The SWIPT Paradigm: Simultaneous Wireless Information and Power Transfer (SWIPT) is no longer just theoretical. Research now focuses on the "energy-latency tradeoff," balancing the time spent harvesting power versus the time spent processing data at the edge.
- Backscattering Breakthroughs: One featured paper developed a "tag-to-tag" network where passive tags communicate via backscatter modulation of an external signal, bypassing the need for active (and power-hungry) radio frequency chains.
- Counter-intuitive RF Physics: Research on multi-tone excitation revealed that applying multiple tones can actually result in lower average output DC power compared to a single-tone case with the same input power—a critical finding for hardware engineers designing rectifiers.
- Incentive Engineering: Technical feasibility isn't enough; the issue explores "Incentive Mechanism Design," using contract theory to motivate access points to share their energy with IoT devices.
Results and Architectural Innovation
The special issue provides a comprehensive snapshot of the state-of-the-art in EH-IoT:
- Efficiency Gains: New suboptimal algorithms for distributed antenna systems were shown to solve efficiency maximization problems that were previously computationally prohibitive.
- Robustness: The introduction of "Robust Transmission Power Management" minimizes cost functions even under worst-case channel states.
- Architectural Innovation: The papers move EH from simple point-to-point links to complex topologies, including 3-D routing for solar-powered nanosatellites and Coordinated Multipoint (CoMP) uplink transmissions.
Limitations and Future Work
The editors acknowledge that while these 24 papers represent significant progress, several hurdles remain:
- Sensitivity and Scale: Passive tags still suffer from low sensitivity. Future work must improve the "demodulator-less" architecture to work over longer distances.
- Network Redesign: We cannot simply "bolt on" EH to existing protocols. The editorial emphasizes that communication solutions must be fundamentally redesigned for a "massive number of mobile terminals."
- Real-world Dynamics: Many models currently rely on Markovian assumptions for energy prediction; future research needs to account for more stochastic, high-mobility environments where energy availability is highly unpredictable.
Summary updated