Guest Editorial: Flexible Reconfigurable Intelligent Surfaces for Integrated Air-to-ground Internet of Things: Architecture, Recent Advances, and Future Applications

Ishtiaq Ahmad, Zeeshan Kaleem, Jan Plachý, Hina Tabassum, Zdeněk Bečvář, Walid SaadIEEE Internet of Things Magazine 2024 · DOI · OpenAlex

TL;DR

This guest editorial introduces a special issue focused on the deployment of Reconfigurable Intelligent Surfaces (RIS) on Unmanned Aerial Vehicles (UAVs) to meet the demanding requirements of 6G and the Internet of Things (IoT). By moving RIS from fixed building walls to mobile aerial platforms, researchers can create a highly flexible, 360-degree controllable wireless environment that significantly improves coverage, security, and latency for ground users.

What Problem Does This Paper Address?

As we move toward 6G, the sheer number of IoT devices—from augmented reality headsets to industrial robots—is exploding. Traditional wireless networks struggle to maintain high Quality-of-Service (QoS) because the wireless propagation environment is naturally "uncontrollable" and unpredictable.

While Reconfigurable Intelligent Surfaces (RIS)—essentially "smart mirrors" for radio waves—can help by reflecting signals toward dead zones, they are typically installed at fixed locations on buildings. This limits their effectiveness due to fixed geometry and line-of-sight constraints. This editorial highlights the shift toward RIS-assisted UAVs, which use the mobility of drones to position these smart surfaces exactly where they are needed, overcoming the limitations of static infrastructure.

Methods

As an editorial, this document summarizes several novel approaches detailed in the special issue's featured articles:

  • Deep Reinforcement Learning (DRL): Used to enable UAVs to autonomously learn optimal flight trajectories and RIS phase-shift configurations to counter signal jamming and maximize communication rates.
  • Digital Twins (DT): One article proposes a DT-assisted RIS architecture to create "Smart Wireless Environments," specifically aimed at reducing latency and increasing reliability for metaverse applications.
  • LSTM-based DRL: A robust Long Short-Term Memory (LSTM) approach is introduced to handle security threats and ensure reliable communication even in the presence of malicious actors.
  • Non-Terrestrial Network (NTN) Integration: Exploring how RIS can be integrated with satellite and high-altitude platforms to provide truly global connectivity.

Datasets

Not discussed in the paper. As this is a guest editorial summarizing a collection of research articles, specific training datasets or benchmarks are not detailed. However, the authors note that the proposed architectures were validated through representative simulation setups in the individual papers.

Key Insights and Ideas

  • From 2D to 3D Control: Deploying RIS on UAVs enables "full-angle (360°)" reflection in the sky. This adds a new dimension of freedom compared to wall-mounted RIS, which can only reflect signals in a 180° semi-sphere.
  • Agility as a Service: RIS-assisted UAVs are particularly "lucrative" for temporary high-density events (like sports or social gatherings) or emergency situations where permanent infrastructure is damaged or non-existent.
  • The Security Double-Edge: While RIS can be used to secure communications against jamming, the editorial also notes they can be used for "radio surveillance" (maximizing eavesdropping rates) if not properly secured, highlighting a critical area for defensive research.
  • Synergy with Digital Twins: The "Metaverse" requires ultra-low latency that standard 5G may not provide. The integration of Digital Twins allows the network to predict and optimize RIS configurations in real-time.

Key Results

While the editorial focuses on high-level summaries, it highlights several quantitative and qualitative outcomes from the featured research:

  • Latency Reduction: Simulation results validated that DT-assisted RIS architectures substantially enhance network latency and reliability.
  • Autonomous Optimization: DRL-based solutions successfully allowed UAVs to learn trajectories that maximize data rates even without explicit knowledge of channel state information (CSI).
  • Security Hardening: New beamforming approaches based on deep deterministic policy gradients were shown to enhance the security of UAV-RIS systems in the presence of imperfect channel data.

Limitations and Future Work

The authors and the featured articles acknowledge several hurdles:

  • Imperfect Channel State Information (CSI): In highly mobile UAV scenarios, getting accurate, real-time data on the wireless channel is difficult and remains a major bottleneck for beamforming.
  • Signal Delays: In non-terrestrial (satellite) integrations, significant signal propagation delays remain a challenge that RIS alone cannot fully solve.
  • Energy Constraints: While RIS is low-power, the UAVs carrying them have limited battery life, necessitating further research into energy-efficient trajectory planning.
  • Hardware Practicality: Moving from theoretical models to actual physical deployment on small drones requires further advances in lightweight, flexible RIS hardware.

Summary updated

Abstract

In 6th generation (6G), a plethora of novel services is unfolding to cater to a myriad of Internet of Things (IoT) devices, surpassing the conventional offerings of mobile phones and internet connectivity. Instances of these services encompass extended reality gadgets, sensors, as well as ground and aerial robots. Nonetheless, the implementation of these sophisticated services presents hurdles for the wireless network, specifically in its capacity to uphold pervasive connections while adhering to varied quality-of-service (QoS) specifications. To sustain capacity growth at an economical cost and low energy consumption while meeting diverse QoS requirements, the advent of innovative technologies is imperative. Recent considerations include millimeter-wave, TeraHertz, and optical frequencies, holographic multiple-input multiple-output (MIMO), ultramassive MIMO, reconfigurable intelligent surfaces (RIS), and ultra-dense networks for various applications. Additionally, the overall system performance is further enhanced through various techniques like beamforming-enabled antennas, cognitive spectrum utilization, and advancements in modulation and coding.
BibTeX
@article{ahmad2024guest,
  author = {Ishtiaq Ahmad and Zeeshan Kaleem and Jan Plachý and Hina Tabassum and Zdeněk Bečvář and Walid Saad},
  title = {{Guest Editorial: Flexible Reconfigurable Intelligent Surfaces for Integrated Air-to-ground Internet of Things: Architecture, Recent Advances, and Future Applications}},
  journal = {IEEE Internet of Things Magazine},
  year = {2024},
  doi = {10.1109/miot.2024.10463699},
}

Loading related content...

Figure