Dispersion of Soybean Stock-Based Nanofiber in Plastic Matrix
Lists
Only you see this
Abstract
Plant stem fibers primarily contain cellulose, hemicellulose, pectin, and lignin. These are bundles of cellulose nanofibers with a diameter ranging between 10 to 70 nm and lengths of thousands of nanometers. The mechanical performance of the cellulose nanofibers is comparable to other engineering materials such as glass fibers, carbon fibers etc. In this project, the cellulose nanofibers were extracted from soybean stock by chemo-mechanical treatments. Since they are new types of reinforced material used, the composition, dispersion and morphological properties of the nanofiber were investigated and their properties compared with those of hemp nanofibers. The matrix polymers used in this project were polyvinyl alcohol (PVA) and polyethylene (PE). These nanofibers were characterized by atomic force microscopy (AFM) and transmission electron microscopy (TEM). X-ray diffraction (XRD) results showed the estimated crystallinity of soybean stock nanofibers. One of the major challenges faced was the incompatibility of the nanofibers and PE. To synthesize a biocomposite with PE, a number of mixing principles were explored. Improved dispersion of nanofibers was achieved by adding ethylene-acrylic oligomer emulsion as a dispersant. Selective chemical treatments increased cellulose content of soybean stock nanofibers from 41% to 61%. Nanofibers reinforced PVA films demonstrated at least a 4-5-fold increase in tensile strength, as compared to the untreated fiber/PVA film. In solid phase nanocomposites, improved mechanical properties were achieved with coated nanofibers.
BibTeX
@inproceedings{wang2006dispersion,
author = {Bo Wang and M. Sain},
title = {{Dispersion of Soybean Stock-Based Nanofiber in Plastic Matrix}},
booktitle = {ACS},
year = {2006},
doi = {10.1021/bk-2006-0938.ch013},
}Loading related content...