Dataset for 'Using Metal Oxide Gas Sensors for the Estimate of Methane Controlled Releases: Reconstruction of the Methane Mole Fraction Time-Series and Quantification of the Release Rates and Locations'
Lists
Only you see this
Abstract
This dataset is associated with the research entitled: 'Using Metal Oxide Gas Sensors for the Estimate of Methane Controlled Releases: Reconstruction of the Methane Mole Fraction Time-Series and Quantification of the Release Rates and Locations’. It contains raw data from six low-cost sensor loggers and one anemometer, collected during an experiment consisting of a series of controlled releases conducted in October 2019 at the TADI (TotalEnergies Anomaly Detection Initiative) platform. <strong>Dataset Structure:</strong> - `time`: Timestamp, marking the exact time the data was collected.<br> - `CH4`: Methane concentration measured by the reference instrument in parts per million (ppm).<br> - `2611C`: Voltage variation measured by the Figaro TGS 2611C-00 MOS sensor in volts (V).<br> - `2600`: Voltage variation measured by the Figaro TGS 2600 MOS sensor in volts (V).<br> - `2611E`: Voltage variation measured by the Figaro TGS 2611E-00 MOS sensor in volts (V).<br> - `RH_DHT22`: Relative humidity measured by the DHT22 sensor in percentage (%).<br> - `RH_SHT75`: Relative humidity measured by the SHT75 sensor in percentage (%).<br> - `T_DHT22`: Air temperature measured by the DHT22 sensor in degrees Celsius (°C).<br> - `T_SHT75`: Air temperature measured by the SHT75 sensor in degrees Celsius (°C).<br> - `T_BMP180`: Air temperature measured by the BMP180 sensor in degrees Celsius (°C).<br> - `T_BMP280`: Air temperature measured by the BMP280 sensor in degrees Celsius (°C).<br> - `P_BMP180`: Atmospheric pressure measured by the BMP180 sensor in pascals (Pa).<br> - `P_BMP280`: Atmospheric pressure measured by the BMP280 sensor in pascals (Pa).<br> - `Release`: Number of the controlled release. <strong>Acknowledgment:</strong> When using this dataset, please reference the original research paper titled ‘Using Metal Oxide Gas Sensors for the Estimate of Methane Controlled Releases: Reconstruction of the Methane Mole Fraction Time-Series and Quantification of the Release Rates and Locations’. <strong>Contact Information:</strong> Olivier Laurent ([email protected])
BibTeX
@inproceedings{martinez2023dataset,
author = {Rodrigo Andres Rivera Martinez and Pramod Kumar and Olivier Laurent and Grégoire Broquet and Christopher Caldow and Ford Cropley and Diego Santaren and Adil Shah and Cécile Mallet and Michel Ramonet and Léonard Rivier and Catherine Juéry and Olivier Duclaux and Caroline Bouchet and Elisa Allegrini and Hervé Utard and Philippe Ciais},
title = {{Dataset for 'Using Metal Oxide Gas Sensors for the Estimate of Methane Controlled Releases: Reconstruction of the Methane Mole Fraction Time-Series and Quantification of the Release Rates and Locations'}},
booktitle = {Zenodo},
year = {2023},
doi = {10.5281/zenodo.8399828},
}Loading related content...