Dataset for "Energy-neutral Wireless-powered Networks"

Oktay Cetinkaya, Ergin Dinc, Caglar Koca, Geoff V. Merrett, Özgür B. AkanePrints 2019 · DOI · OpenAlex

Abstract

This paper presents a summary of research into energy-neutral wireless-powered networks (WPNs), focusing on the critical balance between Radio Frequency (RF) energy harvesting and device consumption. By analyzing carrier frequencies, path loss exponents, and transmission distances, this work establishes the operational boundaries required for battery-less IoT operation. The findings are supported by a dataset collected at the University of Southampton, providing a benchmark for the next generation of autonomous sensors.

Introduction

The "holy grail" of the Internet of Things (IoT) is the deployment of billions of sensors that never require a battery change. While Wireless Power Transfer (WPT) via RF signals is a leading solution for this vision, it faces a fundamental physics challenge: RF energy decays rapidly over distance. To make these systems practical, they must achieve energy neutrality—a state where the energy harvested from the environment or a dedicated source meets or exceeds the energy required for sensing, processing, and communication.

This research quantifies the operational limits of energy-neutrality, accounting for varying frequencies and environmental conditions such as Line-of-Sight (LoS) and Non-Line-of-Sight (NLoS) obstructions.

Methodology

The researchers characterized the performance of WPNs through a combination of analytical modeling and empirical data collection between October 2018 and March 2019. The study investigated several key parameters:

  • Carrier Frequency ($f$): Testing the impact of different frequencies on energy transfer efficiency.
  • Path Loss Exponents ($\delta$): Utilizing specific values for LoS ($\delta = 2.04$) and NLoS ($\delta = 2.94$) to simulate realistic indoor and outdoor environments.
  • Power Constraints: Evaluating systems under a 4W Equivalent Isotropic Radiated Power (EIRP) limit, aligning with standard regulatory ceilings such as those set by the FCC.
  • Hardware Gains: Factoring in transmitter ($G_T$) and receiver ($G_R$) antenna gains (specifically 6dBi for the receiver) to determine the maximum effective distance ($R_{RF}^{max}$).

Dataset Overview

The supporting dataset (DOI: 10.5258/SOTON/D0928) contains the numerical results used to generate the core performance curves of the study. The data includes measurements for received energy ($E_R$), received power ($P_R$), and the relationship between duty cycles ($\Delta$) and performance metrics ($k$) across varying frequencies and distances.

Key Insights and Results

The Frequency Trade-off

The choice of carrier frequency ($f$) dictates the maximum distance ($R_{RF}^{max}$) achievable for energy neutrality. While higher frequencies allow for smaller antenna form factors, they are subject to higher atmospheric and obstacle attenuation, necessitating a careful balance between device size and operational range.

Environmental Impact

The transition from LoS to NLoS environments drastically shrinks the "energy-neutral zone." The jump in the path loss exponent from 2.04 to 2.94 highlights that for autonomous smart city applications, the physical placement and visual clearance to the power source are as critical as the hardware specifications.

Defining the Neutrality Boundary

By varying the RF source output power against distance, the research identifies the "tipping point" where a device shifts from being energy-depleted to energy-autonomous. Specific results include:

  • Maximum Distance Characterization: Specific values for $R_{RF}^{max}$ were established under varying transmitter gains, allowing engineers to size deployments based on specific hardware.
  • Power vs. Distance: Received power ($P_R$) was quantified at a fixed distance of 2.5m, providing a benchmark for the energy budget available to a standard IoT node in LoS scenarios.
  • Duty Cycle Impact: The relationship between the performance metric $k$ and the duty cycle ($\Delta$) suggests how frequently a device can perform tasks without exhausting its energy reserves.

Conclusion and Future Work

This work provides the foundational data for achieving perpetual operation in wireless networks. However, several avenues for future research remain. While this study focused on specific gain values (e.g., $G_R = 6dBi$), future iterations may explore the impact of massive MIMO or beamforming to extend the $R_{RF}^{max}$. Additionally, the impact of highly dynamic environments—such as moving people or changing weather—on path loss exponents requires further investigation. Finally, the efficiency of different energy storage mediums, such as supercapacitors versus thin-film batteries, will be vital in maintaining neutrality over long-term deployments.

Summary updated

Abstract

This dataset supports the article entitled "Energy-neutral Wireless-powered Networks" in IEEE Wireless Communications Letters.
BibTeX
@inproceedings{cetinkaya2019dataset,
  author = {Oktay Cetinkaya and Ergin Dinc and Caglar Koca and Geoff V. Merrett and Özgür B. Akan},
  title = {{Dataset for "Energy-neutral Wireless-powered Networks"}},
  booktitle = {ePrints},
  year = {2019},
  doi = {10.5258/soton/d0928},
}

Loading related content...

Figure