Author Correction: Iontronic pressure sensor with high sensitivity over ultra-broad linear range enabled by laser-induced gradient micro-pyramids

Ruoxi Yang, Ankan Dutta, Bowen Li, Naveen Tiwari, Wanqing Zhang, Zhenyuan Niu, Yuyan Gao, Daniel Erdely, Xin Xin, Tiejun Li, Huanyu ChengNature Communications 2023 · DOI · OpenAlex

This document is an Author Correction for the paper titled "Iontronic pressure sensor with high sensitivity over ultra-broad linear range enabled by laser-induced gradient micro-pyramids," originally published in Nature Communications. While the document itself focuses on rectifying specific errors, it provides a window into a significant piece of research regarding flexible tactile electronics.

TL;DR

This correction ensures the technical accuracy of a study on iontronic pressure sensors that utilize laser-induced gradient micro-pyramids to achieve high sensitivity across a wide range. It fixes critical errors in figure legends, chemical sourcing, and—most importantly—the comparative benchmarking data used to prove the sensor's superiority over existing technologies.

What Problem Does This Paper Address?

The original research tackles a classic trade-off in tactile sensing: the struggle to maintain high sensitivity (the ability to detect tiny pressure changes) over a broad linear range (the ability to provide consistent readings as pressure increases).

Most high-sensitivity sensors saturate quickly, becoming useless at higher pressures. By using iontronic mechanisms—which rely on the change in capacitance at the interface between an electrolyte and an electrode—and a novel gradient micro-pyramid structure, the authors aimed to create a sensor that remains both sensitive and predictable from light touches to heavy loads.

Methods

Based on the title and the correction details, the primary methodology involves:

  • Laser-Induced Fabrication: Using lasers to create "gradient micro-pyramids." This likely refers to a hierarchical or varying-size pyramid structure that allows for a progressive contact area increase under pressure, which is key to maintaining linearity.
  • Iontronic Sensing: Utilizing the Electric Double Layer (EDL) effect. The correction mentions the use of (3-Aminopropyl)triethoxysilane (APTES), a common coupling agent used to functionalize surfaces, likely to improve the interface between the structural layers and the ionic medium.
  • Material Composition: The correction notes errors in the "GPML" (likely a Graphene/Polymer/Ionic Liquid composite) concentrations, specifically correcting the weight percentages (20 wt% vs 50 wt%) for different variants of the material.

Datasets

Not discussed in the paper. As an experimental materials science paper, it does not use "datasets" in the machine learning sense. However, the correction focuses heavily on the comparative literature data found in the Supplementary Information, which serves as the benchmark for the sensor's performance.

Key Insights and Ideas

The correction reveals several "aha moments" regarding how the authors benchmarked their work:

  • Clarifying Sensor Types: The correction distinguishes between different sensing mechanisms. It removes a reference to a sensor that was piezoresistive (changes in resistance) rather than capacitive (changes in charge storage), ensuring an "apples-to-apples" comparison.
  • Correcting the State-of-the-Art: Several values for "Linear Sensing Factor" and "Sensing Range" from previous high-profile studies (e.g., from ACS Applied Materials & Interfaces and Small) were updated. For instance, one previously cited sensitivity was corrected from 18.6 down to 0.0186, highlighting how critical these corrections are for validating the "high sensitivity" claims of the new sensor.
  • Structural Impact: The correction emphasizes that the "Structure Fabrication Method" for comparative sensors (like UV lithography on copper foil) is a vital metric for evaluating the complexity and scalability of the new laser-induced method.

Key Results

While the specific performance metrics of the new sensor are not the focus of the correction, the document clarifies the performance of the materials used:

  • Material Variants: The correction clarifies the performance curves for GPML700 and GPML500 at different concentrations (20 wt% and 50 wt%).
  • Benchmarking Accuracy: The authors corrected the sensing range of a major comparative sensor from a single value (7.4 kPa) to a multi-stage range (0-0.86 / 0.86-4.90 / 4.90-7.4 kPa) with corresponding sensitivities (7.7 / 3.95 / 1.26 kPa⁻¹). This suggests that the authors' new sensor likely outperforms these multi-stage sensitivities with a more consistent, linear response.

Limitations and Future Work

Not discussed in the paper. As this is a correction notice, it does not propose new research directions, though the rigorous cleaning of the supplementary data suggests that future work in this field will require very precise categorization of "EDL" vs. "parallel plate" capacitive sensors to ensure fair comparisons.

Summary updated

BibTeX
@inproceedings{yang2023author,
  author = {Ruoxi Yang and Ankan Dutta and Bowen Li and Naveen Tiwari and Wanqing Zhang and Zhenyuan Niu and Yuyan Gao and Daniel Erdely and Xin Xin and Tiejun Li and Huanyu Cheng},
  title = {{Author Correction: Iontronic pressure sensor with high sensitivity over ultra-broad linear range enabled by laser-induced gradient micro-pyramids}},
  booktitle = {Nature Communications},
  year = {2023},
  doi = {10.1038/s41467-023-39675-z},
}

Loading related content...

Figure