Abstract
This paper introduces the JL-I, a modular reconfigurable robot designed for Urban Search and Rescue (USAR). Unlike traditional fixed-shape platforms, the JL-I utilizes identical tracked modules connected by innovative 3-DOF active spherical joints. This hybrid serial-parallel mechanism allows for flexible reconfiguration in three dimensions. Experimental results demonstrate the robot's ability to climb obstacles twice its height, cross wide gaps, and perform 180° self-recovery. While current locomotion is pre-programmed, this prototype establishes a mechanically robust foundation for future autonomous disaster response systems.
Introduction
Urban Search and Rescue (USAR) operations take place in "hostile environments"—dangerous, unstructured, and often inaccessible to human responders. While mobile robots offer a safer alternative, traditional designs often fail when encountering complex debris or significant vertical obstacles. The JL-I addresses these limitations through a modular approach, using reconfiguration to adapt its physical form to the environment's specific challenges.
Design and Mechanism: The Active Spherical Joint
The core innovation of the JL-I system is the active spherical joint connecting its three identical modules. Most modular robots use simple 1-DOF joints, which limit their adaptability. In contrast, the JL-I employs a hybrid mechanism:
- Parallel Mechanism: Controls pitching and yawing, providing high rigidity and the strength necessary to lift modules during obstacle traversal.
- Serial Mechanism: Allows for 360° rotation around the longitudinal axis.
This design allows the robot to "corkscrew" through narrow openings or lift its front module nearly twice its own height. A cone-shaped docking mechanism further enables the modules to connect and disconnect automatically, providing the system with inherent redundancy; if one module is damaged, the others can detach and continue the mission.
Experimental Results and Performance
The researchers validated the JL-I through a series of physical tests, establishing benchmarks for mobility in disaster-like scenarios.
Key performance metrics include:
- Obstacle Navigation: Successfully climbed steps up to 280 mm high and crossed ditches up to 500 mm wide.
- Self-Recovery: Demonstrated the ability to flip back to an upright position from both 90° and 180° overturned states.
- Docking Robustness: The automatic docking system successfully mated modules even with lateral offsets of ±30 mm.
- Operational Specs: The robot achieves a climbing velocity of 180 mm/s with a 4-hour battery life.
Conclusion and Future Work
The JL-I prototype proves that a hybrid serial-parallel joint mechanism can provide the workspace and strength required for complex USAR tasks. Future development will focus on transitioning from pre-programmed sequences to full autonomy. This will involve integrating advanced sensor suites (such as CCD cameras and LIDAR) and developing algorithms that allow the robot to autonomously identify obstacles and select the optimal reconfiguration strategy.
Summary updated