Abstract
3D printed ultra-high performance concrete (3DP-UHPC) plays an important role in the realization of ultra-high compressive and tensile strengths. Considering the particular characteristics of UHPC, the conversion of UHPC to 3DP-UHPC is a complex phenomenon and has been the subject of numerous studies. It is very important to be able to design a thixotropic structure in the early hydration stage for bridging the gap between the slow setting of UHPC and the rapid setting of the 3D printing procedure. In the design and application of 3DP-UHPC, requirements such as the ratio of coagulant and flocculant, fiber alignment, reinforced 3D printed no-rebar reinforced concrete, safety, cost etc. need to be taken into account. We present a comprehensive review of 3DP-UHPC in concrete construction from preparation to application, including design method, raw materials, mechanical, reinforced methods, and applications. Finally, recommendations are provided to promote the application of 3DP-UHPC in engineering practice.
Introduction
Ultra-High Performance Concrete (UHPC) represents a significant advancement in material science, offering compressive strengths exceeding 120 MPa and exceptional ductility. Traditionally, UHPC is a self-leveling, slow-setting material—properties that are fundamentally at odds with the requirements of 3D concrete printing (3DCP). Successful 3D printing requires a material that can be easily extruded but gains immediate "green strength" to support the weight of subsequent layers. This paper reviews the strategies used to transform UHPC into a printable medium and the unique mechanical advantages, such as fiber alignment, that result from the process.
Bridging the Printability Gap: Rheological Design
The transition from a fluid state to a stable, layered structure is the primary challenge in 3DP-UHPC. Researchers employ two main modification strategies to achieve this:
- Chemical Hydration Accelerated Hardening (CM): Accelerators (e.g., sulfoaluminate cement) are added to synchronize the material's setting time with the printing speed.
- Physical Flocculation Method (PM): Viscosity Modifying Admixtures (VMAs) like silica fume, nano-clay, and HPMC create a thixotropic structure that holds its shape through physical bonding before chemical hydration takes over.
As illustrated in Figure 1, the material must operate within a specific "printable area" defined by shear stress and green strength limits. Precise control over flocculation and hydration rates is essential to ensure structural integrity during the build process without compromising the bond between layers.
Fiber Alignment and Anisotropy
A defining feature of 3DP-UHPC is the alignment of steel fibers induced by the extrusion process. In traditional casting, fibers are randomly oriented. In 3D printing, the nozzle geometry and extrusion forces align fibers parallel to the printing direction, creating a "tailored" material where strength is highest along the print path.
This alignment significantly enhances the Modulus of Rupture (MOR) in the longitudinal direction. As shown in Figure 6, the flexural strength is markedly higher when measured parallel to the print direction (X and Y axes) compared to the vertical direction (Z axis). While this anisotropy introduces challenges at layer interfaces, it allows for "topological optimization," where material is deposited specifically along a structure's primary stress lines.
Key Results and Applications
3DP-UHPC consistently achieves compressive strengths between 120–160 MPa and flexural strengths of 30–50 MPa. Notably, the flexural strength of printed specimens can be nearly double that of cast specimens due to superior fiber alignment.
Innovative applications include "printed rebar," where dual-nozzle systems embed UHPC "ribs" within standard concrete. This provides internal reinforcement and protects steel fibers from corrosion without manual rebar placement. Furthermore, 3DP-UHPC components have demonstrated high impact resistance in explosion tests, performing comparably to traditionally reinforced concrete even without conventional rebar.
Conclusion and Future Outlook
While 3DP-UHPC offers a path toward high-performance, automated construction, several challenges remain. There is a lack of standardized mix designs, and the trade-off between fluidity for extrusion and ultimate material density must be carefully managed. Future research should focus on hybrid fiber mixes to improve post-peak strain capacity and long-term durability studies to assess the performance of layered interfaces under environmental stress.
Summary updated