Turn Minimizing Path Planning and Exploration

18 concepts11 papers1 proposal

Imagine driving a vehicle through a dense city. To get from your starting point to your destination, a standard navigation app might calculate a route that is technically the shortest in total meters, but requires weaving through dozens of narrow side streets and making constant 90-degree turns. In practice, you would likely reject this route in favor of a slightly longer path along a straight avenue. Slowing down, turning, and accelerating again wastes time, burns fuel, and increases cognitive fatigue.

Traditional path planning algorithms like A* or Rapidly-exploring Random Trees (RRT) often suffer from this exact flaw. They treat space as a uniform cost grid or a continuous canvas where distance is the primary metric. As Hu Xu et al. point out in Planning Paths with Fewer Turns on Grid Maps, this distance-only optimization yields jagged trajectories with excessive turns. For physical systems—whether a mobile robot navigating a warehouse, an autonomous vehicle changing lanes, or a robotic drill arm in a coal mine—turns are expensive. They increase control complexity, reduce average speed, and consume significant energy.

To bridge the gap between theoretical shortest paths and practical execution, a growing body of research focuses on turn minimization. By treating directional changes as a core constraint or cost factor, these techniques produce smoother, more efficient, and more natural trajectories.

To understand why turn minimization works, we must change how we define the "cost" of a path. Instead of minimizing Euclidean or Manhattan distance, what if we minimize the number of straight line segments (links) required to connect the start and end points? This is known as the minimum-link path problem.

As Joseph S. B. Mitchell et al. demonstrate in An Optimal Algorithm for Minimum-Link Rectilinear Paths in Triangulated Rectilinear Domains, computing these paths efficiently in environments with axis-parallel obstacles is foundational. In domains like VLSI circuit design and robotics, minimizing these directional changes simplifies manufacturing processes and reduces the complexity of control logic for autonomous systems. When the cost of a path is defined by its links rather than its physical length, the algorithm naturally favors long, uninterrupted straightaways over jagged shortcuts.

How do we translate this geometric insight into standard grid-search algorithms? Traditional A evaluates nodes based on the total estimated cost $f(n) = g(n) + h(n)$, where $g(n)$ is the distance traveled from the start. Because standard A does not care about the orientation of the agent, it treats a straight step and a turning step identically if their lengths are equal.

To minimize turns, the search graph must explicitly track and penalize changes in direction. In the Link* algorithm proposed by Hu Xu et al., the search mechanism accounts for the orientation of transitions between nodes. This modification allows the algorithm to reduce turns by over 40% on random maps while maintaining comparable running times to traditional any-angle planners.

Standard A* (Optimizes Distance)       Turn-Minimizing Search (Optimizes Links)
      [Start]                                 [Start]
         │                                       │
         └───┐  <- Jagged turn                   │  <- Favors continuous
             │     to save a                     │     straight lines
             └───> [Goal]                        └───────> [Goal]

This concept is highly effective when applied to heavy industrial and agricultural machinery, where turning mechanics are cumbersome. For example, Lixing Liu et al. developed an improved A* algorithm for tracked agricultural vehicles in Path Planning and Tracking Control of Tracked Agricultural Machinery Based on Improved A* and Fuzzy Control. By incorporating turning point penalties into the cost function, their approach decreased turning points by 39.01%, leading to smoother maneuvers and reduced fuel consumption in real-world field tests.

Other variations build on this by combining turn penalties with structural path smoothing. Yonghua Xiong, in A Method for Improving the Monitoring Quality and Network Lifetime of Hybrid Self-Powered Wireless Sensor Networks, utilizes an improved bidirectional A* algorithm that integrates adaptive heuristic functions with post-search path smoothing to eliminate redundant nodes. Similarly, Ming Pi et al. demonstrate in Obstacle Crossing Path Planning for a Wheel-Legged Robot Using an Improved A* Algorithm that combining jump-point searches with dynamic heuristic weights drastically reduces the number of search nodes and path segments, allowing wheel-legged robots to maintain forward momentum.

Smoothing Continuous and Sampling-Based Paths

While grid searches operate on discrete steps, sampling-based algorithms like Rapidly-exploring Random Trees (RRT) operate in continuous space. However, because RRTs randomly sample the environment, the raw paths they generate are notorious for being highly erratic and jagged.

To make RRT practical for physical actuators, researchers inject smoothing mechanisms and behavioral biases directly into the exploration phase. In Improved Rapid-Expanding-Random-Tree-Based Trajectory Planning on Drill ARM of Anchor Drilling Robots, Xuhui Zhang et al. tackle the rough trajectories of robotic drill arms by combining an artificial potential field for faster sampling with a greedy approach and B-spline fitting. This smooths out sharp transitions and reduces overall path length by roughly 14%.

For autonomous driving, paths must not only be short but must also conform to natural human driving behaviors. Bingzheng Liu et al. address this in An Improved RRT Path-Planning Algorithm Based on Vehicle Lane-Change Trajectory Data by dynamically biasing the RRT sampling area using real-world lane-change trajectory data. By grounding the random tree expansion in actual driving patterns, the authors achieved a 95.8% reduction in angular curvature, ensuring the vehicle avoids jerky, robotic steering corrections.

Metaheuristics and Explicit Turn Penalties

Another powerful paradigm for path planning relies on swarm intelligence algorithms, such as Ant Colony Optimization (ACO) or Particle Swarm Optimization. In their native forms, these algorithms can easily fall into local optima, creating paths that loop or detour unnecessarily around obstacles.

To combat this, Yi Liu 0027 et al. introduced the Pheromone-Focused Ant Colony Optimization (PFACO) algorithm in Pheromone-Focused Ant Colony Optimization algorithm for path planning. PFACO explicitly penalizes redundant turns during the path construction phase. If an ant attempts to make an unnecessary turn due to local pheromone concentrations, the algorithm dynamically adjusts the parent nodes to mitigate the detour. This mechanism ensures that the collective swarm converges on trajectories that are both short and smooth.

In a similar vein, hybrid swarm approaches—such as the combination of Artificial Bee Colony and Beetle Antennae Search developed by Shuai Wang 0007 et al. in Research on Path Planning Method for Mobile Platforms Based on Hybrid Swarm Intelligence Algorithms in Multi-Dimensional Environments, or the enhanced Harris Hawk Optimization designed by Chaoli Tang et al. in Multi-Strategy Improved Harris Hawk Optimization Algorithm and Its Application in Path Planning—demonstrate that explicitly optimizing for fewer turns naturally correlates with faster algorithmic convergence and more stable path generation in complex, multi-dimensional environments.

From Path Planning to Efficient Exploration

The challenge of turn minimization intensifies when moving from point-to-point path planning to full-map exploration, where an agent must visit every single part of an unknown environment.

In Unlucky Explorer: A Complete non-Overlapping Map Exploration, Mohammadreza Daneshvaramoli explores this problem through a grid-based puzzle called "Maze Dash," which requires an agent to cover an entire map without ever overlapping its own path. The author notes that while achieving complete coverage is computationally difficult on its own, layering a turn-minimization constraint adds a massive wave of complexity. The agent cannot simply sweep back and forth mindlessly; it must strategically plan its global trajectory to balance complete coverage with movement efficiency.

This paradigm shift highlights the ultimate value of the research direction: for real-world robotics, the most efficient path is rarely the one that simply minimizes distance, but rather the one that minimizes the mechanical, computational, and operational overhead of turning.

Key Foundational Work

Planning Paths with Fewer Turns on Grid Maps (2013) — contributed 4 concept elements to this direction.
An Optimal Algorithm for Minimum-Link Rectilinear Paths in Triangulated Rectilinear Domains (2015) — contributed 1 concept elements to this direction.
History & citationVersion 1 · 2026-10-04

Current · Permanent link

View frozen version 1

Cite this direction

Latest version (a living page):

@misc{lacuna_turn_minimization_in_exploration_55165c4b,
  title = {turn minimization in exploration},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/turn-minimization-in-exploration/rdr_55165c4b981f4fe5bc57e56a130c79c9},
  note = {Latest version of a living research direction; cite a version for a fixed text. Accessed 2026-11-21},
}

This exact version (version 1, frozen text):

@misc{lacuna_turn_minimization_in_exploration_55165c4b_v1,
  title = {turn minimization in exploration},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/turn-minimization-in-exploration/rdr_55165c4b981f4fe5bc57e56a130c79c9/v/1},
  note = {Version 1, frozen 2026-10-04. Accessed 2026-11-21},
}
About

These directions overlap with this one through shared papers.

See something wrong? Report a mistake