Runtime Reconfiguration of Hardware Accelerators

142 concepts107 papers3 proposals

The design of computing hardware has long been governed by a strict trade-off: Application-Specific Integrated Circuits (ASICs) offer extreme energy efficiency and throughput but are permanently frozen in silicon, while Central Processing Units (CPUs) offer absolute software flexibility at the cost of performance. Field-Programmable Gate Arrays (FPGAs) bridge this gap by allowing circuits to be reconfigured, but traditional workflows treat them as static devices—compiled once at deployment and left unchanged during execution.

As modern workloads become increasingly dynamic, irregular, and multi-tenant, this static approach creates severe inefficiencies. If a robotic system or a cloud server must support multiple distinct tasks, a static accelerator must physically instantiate hardware for every possible scenario, leaving massive amounts of silicon underutilized.

Runtime reconfiguration resolves this tension by treating physical silicon not as a fixed circuit, but as a fluid, time-multiplexed resource pool. By swapping hardware modules or changing the functional behavior of processing elements on-the-fly, systems can achieve ASIC-level performance with software-like adaptability.

The Granularity Problem: Tile-Level and Partial Reconfiguration

Why not simply reconfigure an entire FPGA gate-by-gate whenever a new task arrives? The obstacle is latency: full bitstream reconfiguration takes too long and requires halting the entire system. To make runtime adaptation practical, hardware must be reconfigured either at a coarser granularity or within isolated physical regions.

Tile-Level Reconfiguration

Instead of rewiring individual logic gates, architectures can be designed around functional tiles or macro blocks that adapt their internal routing in milliseconds or clock cycles. For example, Clément Farabet et al. developed NeuFlow: A runtime reconfigurable dataflow processor for vision, which reconfigures hardware at the functional tile level. This allows a single physical grid to sequentially rewire itself to execute diverse neural network operations—such as filtering, downsampling, and pooling—matching the exact dataflow requirements of each layer in real time.

Dynamic Partial Reconfiguration (DPR)

DPR divides the physical fabric into fixed static regions and isolated reconfigurable slots. This allows specific hardware modules to be compiled into independent "partial bitstreams" and swapped out while the rest of the system continues running uninterrupted.

This mechanism is highly effective for fitting large models into resource-constrained chips. In A Novel Design of Adaptive and Hierarchical Convolutional Neural Networks using Partial Reconfiguration on FPGA, the authors combine algorithmic early exits with DPR. When an image is complex and requires deep processing, advanced neural network layers are physically loaded onto the FPGA on-the-fly. This allows a small chip footprint to execute deep models that would otherwise exceed its total physical logic capacity.

Similarly, in autonomous systems, Bo Yu et al. show in A Survey of FPGA-Based Robotic Computing how a robot can use DPR to transition its resources dynamically—shifting from navigation-heavy accelerators to manipulation-heavy logic as its mission phase changes.

Static Region (Global Control, Memory Interfaces, I/O)
+-------------------------------------------------------+
|                                                       |
|   Reconfigurable Slot A      Reconfigurable Slot B    |
|   +---------------------+    +---------------------+  |
|   |  [ Vision Module ]  |    |  [ Navigation ]     |  |
|   +---------------------+    +---------------------+  |
|              |                          |             |
|              v (Runtime Swap)           v             |
|   +---------------------+    +---------------------+  |
|   |  [ Gesture Recog ]  |    |  [ Manipulation ]   |  |
|   +---------------------+    +---------------------+  |
+-------------------------------------------------------+

Decoupling Control and Bitstream Relocation

In traditional FPGA design, a hardware module is compiled for a specific physical coordinate on the chip. If a system features four identical reconfigurable slots, the developer must compile four distinct bitstreams for a single module—one for each location. This causes a combinatorial explosion in storage requirements.

To achieve true hardware elasticity, modules must be relocatable at runtime. This requires two key innovations:

  1. Interface Standardization: Charalampos Kritikakis et al. demonstrate in Enabling Dynamic System Integration on Maxeler HLS Platforms that by separating control logic from data buffers and placing the control mechanisms in a static region, processing kernels become fully relocatable. Standardizing these physical interfaces allows a single hardware module to be placed into various physical slots or pipeline positions without requiring unique bitstream versions.
  2. On-the-Fly Bitstream Manipulation: Instead of storing pre-compiled bitstreams for every possible slot, the system can modify the bitstream itself during the loading process. As shown by Ping Zhu et al. in A General Low-Cost Fast Hybrid Reconfiguration Architecture for FPGA-Based Self-Adaptive System, a system can intercept a partial bitstream, rewrite its Frame Address Register headers, and recalculate its CRC checksums at runtime. This allows a single bitstream file to be deployed to any available physical coordinate on the chip, drastically reducing storage overhead.

Managing Hardware as an Operating System Resource

When hardware configurations change every few milliseconds, manual resource management becomes impossible. The field has consequently shifted toward treating reconfigurable hardware as a pool of virtualized resources managed by an operating system layer.

Christophe Bobda outlines this paradigm shift in Experiences in Teaching Reconfigurable Computing at Erlangen University, arguing that hardware design must move away from static circuits toward temporal and spatial placement strategies. Just as a software OS allocates memory addresses and schedules CPU threads, a hardware OS must determine where and when specific hardware modules should be instantiated within the available fabric.

Software Applications / Workloads
       |
       v
+-------------------------------------------------------+
|  Hardware Operating System (e.g., FOS)                |
|  - Spatial Placement (Where to put the module)        |
|  - Temporal Scheduling (When to load the module)      |
|  - Bitstream Relocation & Header Rewriting            |
+-------------------------------------------------------+
       |
       v
Physical Reconfigurable Fabric (Slots / Tiles)

This concept is fully realized in frameworks like FOS: A Modular FPGA Operating System for Dynamic Workloads. Developed by Anuj Vaishnav et al., FOS decouples accelerators from the underlying infrastructure shell. It monitors runtime demand and automatically scales the number of active accelerator instances up or down by manipulating partial bitstreams.

In cloud environments, this virtualization enables multi-tenant isolation. Shulin Zeng et al. show in Enabling Efficient and Flexible FPGA Virtualization for Deep Learning in the Cloud that space-division multiplexing combined with dynamic resource allocation allows cloud providers to reallocate hardware pools in real-time (~1ms reconfiguration delay), maximizing throughput across unpredictable workloads.

Polymorphic Hardware and Dual-Mode Execution

Runtime reconfiguration does not always require swapping out large chunks of logic via bitstreams. It can also be achieved at the macro level by changing the functional mode of existing hardware blocks on every clock cycle using opcodes or configuration registers.

Compute vs. Memory Flexibility

In Computing-In-Memory (CIM) architectures, hardware arrays are typically optimized for a fixed ratio of arithmetic operations to data storage. However, different layers of a neural network exhibit vastly different arithmetic intensities.

To address this bottleneck, Shixin Zhao et al. introduced a dual-mode compiler called CMSwitch in Be CIM or Be Memory: A Dual-mode-aware DNN Compiler for CIM Accelerators. The underlying hardware arrays can dynamically switch between "compute mode" (performing parallel matrix multiplication) and "memory mode" (acting as a high-capacity scratchpad memory). By reconfiguring these arrays layer-by-layer, the accelerator adapts to large activation or cache requirements on-the-fly, preventing resource underutilization.

Performance vs. Reliability Flexibility

In safety-critical environments like aerospace or autonomous driving, hardware must balance raw performance with fault tolerance. Philip Wiese et al. address this in RedMulE-FT: A Reconfigurable Fault-Tolerant Matrix Multiplication Engine.

Instead of running permanently in a slow, redundant, high-reliability mode, the architecture uses shadowed register files to toggle its operational state before executing a task. When processing non-critical data, it operates in a high-throughput mode; when a mission-critical operation is detected, it instantly switches to a high-reliability, fault-tolerant mode.

Dual-Layer Reconfiguration

This multi-level approach is often combined into a dual-layer strategy. As demonstrated by Nikita Lazarev et al. in Dagger: Towards Efficient RPCs in Cloud Microservices with Near-Memory Reconfigurable NICs, a system can use structural FPGA bitstream modifications for major protocol overhauls, while utilizing a fast, register-based interface for immediate, on-the-fly adjustments to operational parameters like batch sizes. This hierarchical approach ensures that hardware can adapt to both long-term structural shifts and rapid environmental fluctuations.

History & citationVersion 1 · 2026-10-04

Current · Permanent link

View frozen version 1

Cite this direction

Latest version (a living page):

@misc{lacuna_dynamic_hardware_reconfiguration_f396ad75,
  title = {dynamic hardware reconfiguration},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/dynamic-hardware-reconfiguration/rdr_f396ad75ffd1438fb662abdfa3a3aa78},
  note = {Latest version of a living research direction; cite a version for a fixed text. Accessed 2026-11-20},
}

This exact version (version 1, frozen text):

@misc{lacuna_dynamic_hardware_reconfiguration_f396ad75_v1,
  title = {dynamic hardware reconfiguration},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/dynamic-hardware-reconfiguration/rdr_f396ad75ffd1438fb662abdfa3a3aa78/v/1},
  note = {Version 1, frozen 2026-10-04. Accessed 2026-11-20},
}
About

These directions overlap with this one through shared papers.

See something wrong? Report a mistake