Overcoming Residual Mortar Porosity in Recycled Concrete Aggregates

26 concepts17 papers1 proposal

The construction industry is one of the largest consumers of natural resources and a massive generator of demolition waste. While upcycling demolished concrete into Recycled Concrete Aggregates (RCAs) offers an intuitive path toward a circular economy, a fundamental material defect stands in the way: residual mortar.

When old concrete is crushed, the resulting aggregates are not clean stone. Instead, they remain jacketed in a layer of adhered cement paste from their previous service life. This residual mortar is highly porous, riddled with micro-cracks, and highly absorbent. When mixed into new concrete, it acts like a sponge, sucking up water and disrupting the intended water-to-cement ratio. Furthermore, it introduces a weak Interfacial Transition Zone (ITZ)—the microscopic boundary layer where structural failures typically originate.

To transition recycled aggregate concrete (RAC) from low-grade, non-structural applications (like road sub-bases) to high-performance structural engineering, researchers are attacking this porosity problem from three distinct angles: microstructural remediation, macrostructural confinement, and computational uncertainty management.


Microstructural Remediation: Plugging the Voids

The most direct way to fix recycled aggregates is to heal the porous mortar matrix before or during the mixing phase. If the microscopic voids can be filled, the aggregate's water absorption drops, and the mechanical integrity of the ITZ is restored.

Mineral Slurries and Carbonation

One elegant mechanism for closing these micro-voids is accelerated mineralization. Guoliang Guo et al. developed a method that pre-immerses RCAs in a carbide slag slurry and then exposes them to carbon dioxide ($CO_2$). The slurry infiltrates the porous residual mortar, and the subsequent carbonation reaction precipitates solid calcium carbonate ($CaCO_3$) directly within the microscopic pores. This chemical "plugging" densifies the aggregate jacket, significantly reducing water absorption and strengthening the resulting ITZ. As reviewed by Xiaoyang Yi et al., these types of physical-chemical modifications are essential for bridging the performance gap between secondary and virgin materials.

Pozzolanic Secondary Hydration

An alternative approach relies on supplementary cementitious materials to trigger secondary chemical reactions within the mix. Teng Yu et al. demonstrated that incorporating a 10% addition of zeolite powder significantly improves the durability of recycled concrete. The fine zeolite particles act as a physical pore filler, but more importantly, they retain moisture and fuel a secondary pozzolanic reaction. This reaction consumes weak calcium hydroxide and converts it into dense calcium silicate hydrate (C-S-H) gel, creating a highly compact microstructure.

This microstructural densification directly mitigates one of RAC's worst vulnerabilities: poor frost resistance. In cold climates, water trapped inside the porous residual mortar expands during freezing, causing rapid material degradation. Ruidong Wu et al. confirmed that full replacement with untreated recycled aggregates severely compromises freeze-thaw durability, emphasizing the necessity of pore-filling strategies. To optimize these complex multi-material mixtures, Lu Zhang et al. utilized Box-Behnken response surface modeling to balance fine recycled aggregates and waste concrete powder, mapping how microstructural adjustments dictate macroscopic compressive strength.


Macrostructural Confinement: Squeezing Out Weakness

When microstructural remediation is insufficient or cost-prohibitive, engineers can use structural mechanics to bypass the material's intrinsic weaknesses. Concrete is notoriously weak in tension and shear but performs exceptionally well under triaxial compression. By preventing a porous concrete element from expanding laterally, you force the internal micro-cracks to stay closed, dramatically elevating its load-bearing capacity.

Axial Load
   │
   ▼
┌───┐ ◄─── High Confinement Pressure (Steel Tube / CFRP)
│R  │
│A  │ Restricts lateral expansion, preventing the 
│C  │ porous residual mortar from crumbling prematurely.
└───┘ ◄─── High Confinement Pressure
   ▲
   │

Concrete-Filled Steel Tubes (CFST)

Encasing recycled concrete inside a structural steel shell creates a powerful symbiotic relationship. Yicen Liu et al. investigated this confinement effect in stub columns, demonstrating that while an increase in recycled aggregate content slightly reduces confinement efficiency, the triaxial stress state induced by the steel tube successfully compensates for the RAC's lower intrinsic strength. Extending this to complex geometries, Zhihua Chen et al. showed that L-shaped columns filled with RAC maintain excellent structural performance under eccentric compression, provided the replacement ratio of recycled aggregate is managed carefully.

External Fiber Wrapping

For highly degraded or alternative porous aggregates—such as crushed red bricks from historical demolition waste—external wrapping offers a lightweight alternative to steel tubes. Yongcheng Ji et al. utilized Carbon Fiber Reinforced Plastics (CFRP) to wrap recycled red brick concrete. Their finite element models revealed that the CFRP's "hoop effect" acts as a rigid boundary that restricts lateral deformation under axial loads. This mechanical confinement prevents the highly porous brick aggregates from crumbling prematurely, effectively upcycling low-grade demolition waste into structural-grade components. This mirrors broader historical efforts to use external reinforcement, such as the sandwich configurations of steel fiber nets designed by Yuzo Fujita et al. to elevate recycled textile composites to industrial safety standards.


Managing Material Variability via Machine Learning

Even with remediation and confinement, recycled aggregates introduce a chaotic variable into civil engineering: heterogeneity. Unlike virgin stone, which has predictable, standardized properties, every batch of demolition waste features varying amounts of residual mortar, micro-cracking, and contamination.

This high variance makes traditional empirical design formulas unreliable. As noted by Chuangui Li et al., while concrete made with 100% recycled aggregates can technically meet standard structural grades, predicting its exact behavior requires accounting for complex internal physical defects. Similarly, in parallel domains like asphalt recycling, Wei Tang et al. have highlighted how the degradation of aged binders complicates workability and performance, requiring specialized rejuvenators to stabilize the mix. In concrete, substituting natural sand with industrial byproducts like copper slag introduces similar microstructural changes that alter long-term durability and chloride penetration resistance, as explored by Lu Zhang et al..

To safely deploy these variable materials without over-designing and wasting resources, the field is turning to data-driven modeling:

  • Advanced Regression: To accurately assess suitability for infrastructure, Shuwei Gu et al. developed a hybrid machine learning model combining Random Forest with the Firefly Algorithm to predict the flexural strength of recycled concrete for road paving, bypassing the need for destructive testing.
  • Uncertainty Quantification: Because missing or noisy data is common when sourcing secondary materials, Shuwei Dong introduced a deep learning framework integrated with conformal prediction. Instead of outputting a single, potentially overconfident strength value, this model provides mathematically rigorous prediction intervals. This allows structural engineers to quantify exactly how much uncertainty a specific batch of recycled aggregate introduces, ensuring safety margins are maintained without discarding sustainable materials.

By combining microstructural fixes that plug the pores of residual mortar, macrostructural jackets that squeeze strength out of weak matrices, and machine learning models that quantify material chaos, modern research is successfully transforming unpredictable demolition waste into reliable, structural-grade concrete.

Key Foundational Work

Confinement Effect and Efficiency of Concentrically Loaded RACFCST Stub Columns (2021) — contributed 3 concept elements to this direction.
Experimental study on the influence of recycled aggregates on the mechanical properties of concrete (2021) — contributed 2 concept elements to this direction.
Effect of Rejuvenators on the Workability and Performances of Reclaimed Asphalt Mixtures (2021) — contributed 1 concept elements to this direction.
History & citationVersion 1 · 2026-10-04

Current · Permanent link

View frozen version 1

Cite this direction

Latest version (a living page):

@misc{lacuna_recycled_aggregate_porosity_05e3c9b6,
  title = {recycled aggregate porosity},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/recycled-aggregate-porosity/rdr_05e3c9b621e54e3684d1efa26c9f99d1},
  note = {Latest version of a living research direction; cite a version for a fixed text. Accessed 2026-11-21},
}

This exact version (version 1, frozen text):

@misc{lacuna_recycled_aggregate_porosity_05e3c9b6_v1,
  title = {recycled aggregate porosity},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/recycled-aggregate-porosity/rdr_05e3c9b621e54e3684d1efa26c9f99d1/v/1},
  note = {Version 1, frozen 2026-10-04. Accessed 2026-11-21},
}
About

These directions overlap with this one through shared papers.

See something wrong? Report a mistake