Modern scientific computing faces a profound hardware tension. On one side, the rise of highly parallel architectures like GPUs and Tensor Processing Units (TPUs) offers massive computational throughput, but this performance is heavily optimized for lower-precision arithmetic, such as single-precision (32-bit FP32) or half-precision (16-bit FP16) formats. On the other side, traditional scientific workflows rely on double-precision (64-bit FP64) to guarantee numerical stability and prevent rounding errors from corrupting physical laws.
To maximize performance without sacrificing scientific validity, researchers must navigate the trade-offs of reduced precision. Understanding where precision can be safely dropped—and where it must be fiercely protected—requires looking closely at how numerical errors interact with physical dynamics.
Statistical Convergence vs. Instantaneous Fidelity
The viability of reduced-precision computing often depends on what the simulation aims to measure. In fluid dynamics and turbulence modeling, there is a sharp divide between tracking the exact state of a system over time versus capturing its long-term statistical properties.
For large-scale turbulence simulations using methods like the Fast Multipole Method (FMM), the authors of early GPU acceleration studies demonstrated that single-precision arithmetic is entirely sufficient for maintaining the accuracy of complex fluid statistics (Yokota et al., 2009). Because turbulence is inherently stochastic, microscopic rounding errors act merely as background noise that averages out over large spatial and temporal scales. In these scenarios, researchers can safely exploit the higher throughput of single-precision hardware (Yokota et al., 2013).
FP32 (Lower Precision) --> High Throughput --> Accurate Statistical Averages (e.g., Energy Spectra)
FP64 (Higher Precision) --> Low Throughput --> Accurate Instantaneous Structures (e.g., Vortex Tracking)
However, this tolerance disappears when the goal shifts to Direct Numerical Simulation (DNS) of chaotic, compressible flows where instantaneous structures matter. As shown by Cao et al. (2022), switching to single precision to alleviate memory bottlenecks introduces round-off errors that quickly grow to exceed the inherent discretization errors of the numerical scheme itself.
When this happens, the fine-grained, time-evolutionary details of turbulent eddies become unphysical. While the long-term statistical averages might still look plausible, the actual deterministic trajectory of the flow is ruined. For high-fidelity simulations capturing chaotic dynamics across a wide dynamic range, double precision remains an absolute requirement (Cao et al., 2024).
Trajectory Drift and Topological Fidelity
The danger of accumulated round-off error is most vivid in Lagrangian trajectory integration, where the paths of individual tracer particles are tracked through a simulated fluid flow. This technique is essential for identifying Lagrangian Coherent Structures (LCS)—the hidden "skeletons" that shape fluid transport.
In complex 3D flows, particularly those discretized on unstructured grids, small numerical inaccuracies in velocity interpolation compound exponentially over time. As detailed by Ameli et al. (2014), single-precision arithmetic lacks the accuracy required for long-duration trajectory integration.
Actual Flow Branch 1 <===\
\--- [Separatrix / Manifold]
Actual Flow Branch 2 <====/ * Tiny FP32 round-off error kicks tracer across boundary!
When a tracer particle approaches a sensitive topological boundary (a separatrix), a tiny 32-bit rounding error can erroneously push the particle onto the wrong side of the manifold. Once misdirected, the particle deviates into an entirely incorrect spatial region or flow branch. This cumulative drift destroys the topological accuracy of the simulation, potentially leading to incorrect scientific or medical conclusions in high-resolution models (Ameli et al., 2014).
Instabilities at Boundaries and Interfaces
Beyond trajectory drift, dropping precision can prematurely trigger physical instabilities. In massive simulations of highly dynamic systems, such as rocket engine exhaust plumes, mixed-precision formats (FP16/FP32) can cause an earlier onset of physical instabilities compared to full FP32 or FP64 pipelines (Schäfer et al., 2025).
This occurs because low-precision representations introduce artificial, non-physical perturbations. In systems highly sensitive to initial conditions, these numerical perturbations act as seeds that accelerate the growth of actual physical instabilities, artificially shortening the stable lifespan of the simulation.
Similarly, sensitive regions like fluid interfaces are highly vulnerable to precision reduction. Aggressive truncation in these zones can introduce subtle but significant artifacts that alter the macroscopic physical outcomes of the model (Hoerold et al., 2025).
In adaptive mesh refinement frameworks, such as h-adaptive finite element methods, using lower precision for the primal solution can break mathematical guarantees like Galerkin orthogonality. On very fine meshes, this breakdown results in highly unreliable error indicators, causing the algorithm to misguide its mesh refinement strategies (Hu, 2023).
Strategic Mixed Precision and Mitigation
To bypass these limitations, modern scientific computing rarely relies on a naive, global drop in precision. Instead, the field has moved toward strategic mixed-precision arithmetic and alternative number formats.
Underflow, Overflow, and Matrix Operations
When evaluating dense datasets via Hierarchical Matrices (H-matrices), transitioning directly to lower-precision formats risks causing numerical underflow or overflow during matrix-vector multiplications (Ooi et al., 2019). To prevent simulation failure, developers must isolate the most sensitive matrix blocks for high-precision execution while delegating well-conditioned blocks to lower precision.
Alternative Number Formats
In weather and climate modeling, computational demands are immense, but forecast errors are often dominated by uncertainties in initial conditions or parameterized physics rather than rounding errors. This makes climate modeling an ideal candidate for aggressive precision reduction.
As shown by Düben et al. (2020), while a naive switch to standard 16-bit floating-point formats degrades model performance, utilizing the alternative posit number format—alongside targeted rescaling and mixed-precision execution—allows models to achieve massive speedups without sacrificing crucial forecasting accuracy. Posits excel here because they offer dynamic tapering, providing higher precision for values close to one at the expense of extreme scales, matching the distribution of many physical variables.
Automated Profiling
To make these precision-tuning choices practical, researchers require automated tools. Frameworks like RAPTOR allow developers to profile scientific code dynamically, identifying specific code regions and variables that are amenable to lower precision while flagging sensitive operations that must remain in higher precision to preserve physical fidelity (Hoerold et al., 2025).
Ultimately, deploying reduced precision successfully requires moving away from treating hardware precision as a global toggle. Whether minimizing round-off errors in low-velocity regimes for the Lattice Boltzmann method (Januszewski et al., 2014), managing coordinate precision in molecular dynamics engines (Shirts et al., 2017), or mapping fluid solvers to native TPU architectures (Wang et al., 2022), the goal remains the same: align the mathematical structure of the physical problem with the underlying constraints of the hardware.
Key Foundational Work
Petascale turbulence simulation using a highly parallel fast multipole method on GPUs (2013) — contributed 1 concept elements to this direction.
Fast multipole methods on a cluster of GPUs for the meshless simulation of turbulence (2009) — contributed 1 concept elements to this direction.