Direct Error Rate Minimization for Wireless Precoding

17 concepts9 papers

In wireless communications, the traditional playbook for designing precoders and beamformers relies on proxy metrics. Engineers typically maximize spectral efficiency, channel capacity, or the Signal-to-Interference-plus-Noise Ratio (SINR). These metrics are mathematically elegant and tractable, but they share a fundamental flaw: they do not always align with the ultimate goal of a communication link—ensuring that the receiver decodes transmitted symbols without errors.

As wireless systems face severe hardware constraints (such as low-resolution digital-to-analog converters) and highly complex environments (such as interference channels and intelligent reflecting surfaces), these proxy metrics break down. A new paradigm has emerged that bypasses proxies entirely, focusing instead on direct error rate minimization. By directly optimizing for Symbol Error Rate (SER), Symbol Error Probability (SEP), or exact Mean Square Error (MSE), this approach reshapes signal constellations to maximize the safety margin against noise and interference.

The Gap Between Capacity and Reliability

To understand why direct optimization works, we must first understand why indirect optimization fails. Traditional beamforming assumes a linear relationship between signal power and link quality. However, as Tian Lin et al. point out in Hybrid Beamforming for Millimeter Wave Systems Using the MMSE Criterion, maximizing spectral efficiency does not account for the precise structure of noise and hardware constraints during the signal processing stage.

When a system uses higher-order modulation schemes (like 64-QAM or 256-QAM), the data symbols are packed tightly into a constellation geometry. In these scenarios, interference does not act as a uniform increase in background noise; instead, it pushes specific symbols across decision boundaries. Hieu Duy Nguyen, in Improper Signaling for Symbol Error Rate Minimization in K-User Interference Channel, demonstrates that minimizing standard Mean Squared Error (MSE) can be highly suboptimal for higher-order modulations because it fails to balance the worst-case pairwise error probabilities across users. Directly minimizing the maximum SER ensures that no single user suffers from catastrophic boundary violations.

Traditional (Maximize SINR):
[Symbol] ---> (Boost Power) ---> [ Decision Boundary ] (Ignores boundary geometry)

Direct SER Minimization:
[Symbol] --------> Maximize Distance --------> | Decision Boundary |

Geometric Intuition: Optimizing for Decision Boundaries

Direct error rate minimization works by treating the receiver's decision boundaries as the primary constraint of the optimization problem. Instead of maximizing the average received power, the transmitter manipulates the precoding matrix to maximize the distance between the received signal and the nearest error threshold.

This concept becomes powerful in symbol-level precoding (SLP). In Minimum Symbol-Error Probability Symbol-Level Precoding With Intelligent Reflecting Surface, Wing-Kin Ma et al. show that by directly targeting symbol-error probability (SEP), a system can dynamically adjust to phase shifts and reflections in the environment. Rather than treating an Intelligent Reflecting Surface (IRS) as a tool to simply boost channel gain, the optimization coordinates the base station and the IRS to sculpt the received constellation, ensuring every symbol lands as far from its decision boundaries as possible.

Surviving Severe Hardware Constraints

The superiority of direct optimization is most obvious in hardware-constrained architectures, such as massive MIMO systems operating with low-cost components.

One-Bit Quantization

In systems utilizing one-bit Digital-to-Analog Converters (DACs), the transmitted signals are severely quantized to just two states (e.g., $+1$ and $-1$). Traditional linear precoding techniques like Minimum Mean Squared Error (MMSE) fail here because they assume high-resolution, continuous signal spaces. Wing-Kin Ma et al. address this in One-Bit Massive Mimo Precoding via a Minimum Symbol-Error Probability Design. By reformulating the precoding problem as a biconvex optimization that directly minimizes SER, the authors create a design that explicitly accounts for the coarse quantization distortion, outperforming classical MMSE approximations.

Constant Envelope Precoding

To maximize power amplifier efficiency, systems often restrict signals to a Constant Envelope (CE), meaning only the phase of the signal can be altered, not its amplitude. This introduces severe non-linear distortion. In Minimum Symbol Error Rate-Based Constant Envelope Precoding for Multiuser Massive MISO Downlink, Mingjie Shao et al. introduce a crucial mechanism to make direct SER optimization work under these constraints: constellation scaling.

Because the transmitter cannot change individual symbol amplitudes, the authors introduce a variable scaling factor that dynamically shrinks or expands the entire received constellation size. This optimization balances signal distortion against noise robustness, finding the exact scale where the symbols sit safely within their decision regions despite the rigid constant-envelope constraint.

Application to Next-Generation Networks

As wireless networks transition toward 6G, the optimization landscapes become non-convex and mathematically intractable for traditional derivative-based solvers. This is especially true when jointly optimizing active beamforming at a base station and passive phase shifts at a Reconfigurable Intelligent Surface (RIS).

To solve these complex reliability problems, Trinh Van Chien et al. explore direct SER minimization in Active and Passive Beamforming Designs for SER Minimization in RIS-Assisted MIMO Systems and Solving Indefinite Communication Reliability Optimization for RIS-Aided Mobile Systems by an Improved Differential Evolution. The authors demonstrate that optimizing for average SER yields significantly higher link dependability than optimizing for sum-rate or minimum SINR. Because the objective function directly maps to error rates, meta-heuristic frameworks like Differential Evolution can navigate the non-convex search space to find beamforming configurations that protect the most vulnerable users in the network.

This philosophy of evaluating exact error patterns extends beyond the physical layer. For instance, in source coding over imperfect channels, Yao Zhao 0001 et al. demonstrate in Index assignment for MDVQ over memoryless binary symmetric channel with packet erasure that a distortion cost function evaluating the precise probability of bit flips and packet erasures simultaneously allows genetic algorithms to find highly robust index assignments.

Ultimately, whether managing hardware quantization, multi-user interference, or reflective surfaces, the shift toward direct error rate minimization reflects a core realization: when communication environments become highly constrained, optimizing for the proxy is no longer a substitute for optimizing for the true objective.

Key Foundational Work

Improper Signaling for Symbol Error Rate Minimization in K-User Interference Channel (2015) — contributed 4 concept elements to this direction.
Index assignment for MDVQ over memoryless binary symmetric channel with packet erasure (2006) — contributed 1 concept elements to this direction.
History & citationVersion 1 · 2026-10-04

Current · Permanent link

View frozen version 1

Cite this direction

Latest version (a living page):

@misc{lacuna_direct_symbol_error_rate_minimization_6d6d1b93,
  title = {direct symbol error rate minimization},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/direct-symbol-error-rate-minimization/rdr_6d6d1b9301c549e7861f916a33e78b52},
  note = {Latest version of a living research direction; cite a version for a fixed text. Accessed 2026-11-19},
}

This exact version (version 1, frozen text):

@misc{lacuna_direct_symbol_error_rate_minimization_6d6d1b93_v1,
  title = {direct symbol error rate minimization},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/direct-symbol-error-rate-minimization/rdr_6d6d1b9301c549e7861f916a33e78b52/v/1},
  note = {Version 1, frozen 2026-10-04. Accessed 2026-11-19},
}

See something wrong? Report a mistake