To discover physics beyond the Standard Model, modern physics experiments must look for incredibly rare phenomena, such as neutrinoless double-beta decay ($0\nu\beta\beta$) or the scattering of light dark matter particles. Because these events occur so infrequently, detectors must operate with near-zero background noise.
Traditionally, physicists shield detectors from external radiation by placing them deep underground, beneath kilometers of rock, and surrounding them with thick layers of lead or water. However, a more insidious source of interference exists: cosmogenic activation. This occurs when detector materials are exposed to cosmic rays at the Earth's surface during manufacturing, transport, or storage, creating radioactive isotopes inside the very materials used to build and shield the experiment.
The Problem of Internal Radioactivity
When high-energy cosmic ray neutrons strike stable nuclei at the surface of the Earth, they can cause spallation reactions, knocking protons and neutrons out of stable atoms and transforming them into unstable, radioactive isotopes. As Aalseth et al. point out, this internal contamination cannot be removed by external shielding; it remains a persistent background embedded directly within the experimental apparatus.
The specific isotopes produced depend on the target material, and they directly threaten the energy regions where rare events are expected:
- In Liquid Xenon: In experiments like LUX-ZEPLIN (LZ), above-ground exposure to cosmic rays generates Argon-37 ($^{37}\text{Ar}$), as quantified by Aalbers et al.. This isotope creates a measurable background during the early stages of the experiment, limiting its initial sensitivity to low-energy signals.
- In Germanium Crystals: For dark matter searches like CDEX-50, cosmic rays induce the production of Tritium ($^3\text{H}$) directly within high-purity germanium crystals. As Geng et al. explain, Tritium undergoes beta decay, releasing low-energy electrons that perfectly mimic the faint, low-energy nuclear recoils expected from light dark matter.
Because these isotopes are structurally part of the detector medium or its immediate housing, the only way to defeat them is to prevent their creation entirely.
In-Situ Underground Electroforming
Structural components, such as the cryostats and support structures that hold the detectors, represent a massive fraction of an experiment's material budget. Standard commercial copper is highly conductive and structurally sound, but it contains trace radioactive impurities and suffers from surface-level cosmogenic activation.
To solve this, experiments like the MAJORANA DEMONSTRATOR pioneered the use of ultra-pure electroformed copper (Elliott et al.; Aalseth et al.). Electroforming is a chemical process where copper is dissolved into an acid solution and plated atom-by-atom onto a mandrel. This leaves behind uranium, thorium, and other natural contaminants.
[Surface Manufacturing] ---> Exposed to Cosmic Rays ---> Cosmogenic Activation (Internal Isotopes)
|
[Underground Electroforming] ---> Shielded from Cosmic Rays ---> Ultra-Pure, Activation-Free Copper
Crucially, if this electroforming happens on the surface, cosmic rays immediately begin activating the newly purified copper. To circumvent this, the authors developed techniques to electroform copper entirely within deep underground laboratories (Myslik et al.; Aalseth et al.). By growing the copper components under the protection of a rock overburden, they eliminate surface-level cosmic ray exposure entirely.
The impact of this approach is profound. In the design of the next-generation nEXO experiment, the authors demonstrated that utilizing electroformed copper for the detector vessel drastically reduces its background contribution to less than 1% of the experiment's total background budget (Adhikari et al.).
Material Biographies and Low-Altitude Logistics
Not every component can be fabricated in an underground laboratory. High-purity crystals must be grown in specialized facilities, and certain delicate electronics or cables must be sourced from specialized manufacturers. For these components, cosmogenic activation control shifts from prevention via fabrication to mitigation via logistics.
Because cosmic ray flux increases exponentially with altitude, shipping a component via an airplane exposes it to intense radiation, causing rapid cosmogenic activation. To manage this risk, collaborations employ two primary strategies:
- Strict Exposure Tracking: In the MAJORANA DEMONSTRATOR, the authors built a schema-free Parts Tracking Database (Abgrall et al.). This database recorded the complete "biography" of every single component—logging every machining step, cleaning procedure, and transit route. By tracking the exact duration and altitude of a part's journey, the system could precisely calculate its cumulative cosmic ray exposure and predict its internal activation level.
- Low-Altitude Logistics and Underground Storage: To keep activation to an absolute minimum, experiments mandate strict logistical constraints. As outlined by Geng et al., materials are transported via low-altitude ground shipping routes rather than air travel, and they are immediately transferred to underground storage facilities during any production pauses.
This meticulous attention to detail extends down to the smallest components. Standard commercial cables and connectors are too radioactive for these environments, requiring the custom fabrication of signal paths using pristine, unpigmented plastics and ultra-pure copper wires that are carefully shielded from surface exposure (Busch et al.).
By treating cosmic ray exposure as a strict currency budget—tracked by databases, minimized by low-altitude logistics, and avoided entirely through underground electroforming—rare-event experiments can achieve the pristine, zero-background environments required to probe the deepest mysteries of the universe.
Key Foundational Work
The majorana neutrinoless double-beta decay experiment (2004) — contributed 5 concept elements to this direction.
The MAJORANA DEMONSTRATOR: An R&D project towards a tonne-scale germanium neutrinoless double-beta decay search (2009) — contributed 1 concept elements to this direction.
The MAJORANA Project (2009) — contributed 1 concept elements to this direction.